Painting with wrinkle paint- its easy

June 7, 2018

3

0

TAAAAA DAAAA its done and after a day or so of drying and heating-to speed up the hardning, its ready to strip off the lettering. Dont rush it, touch the lettering to see if the paint is soft or not. I also masked the outlets to allow the hoses to slip on for a leak proof finish.

TAAAAA DAAAA its done and after a day or so of drying and heating-to speed up the hardning, its ready to strip off the lettering. Dont rush it, touch the lettering to see if the paint is soft or not. I also masked the outlets to allow the hoses to slip on for a leak proof finish.

0 2018/06/07 10:40:16 19529

I cleaned the manifolds and then added 3 coats of paint about 15 minutes apart - temp dependent. But before the last coat dries, just tacks up, avoid runs but add heavy coats, you can paint lightly every 10 minutes if warm.

I cleaned the manifolds and then added 3 coats of paint about 15 minutes apart - temp dependent. But before the last coat dries, just tacks up, avoid runs but add heavy coats, you can paint lightly every 10 minutes if warm.

0 2018/06/07 10:40:52 19529

Trick is to warm paint after last coat has hardened up about 1/2 hour. I PAINT the surface with heat lamps moving as needed to SPREAD the wrinkle effect. Its interesting to watch.

Trick is to warm paint after last coat has hardened up about 1/2 hour. I PAINT the surface with heat lamps moving as needed to SPREAD the wrinkle effect. Its interesting to watch.

0 2018/06/07 10:41:08 19529