CrossfireForum - The Chrysler Crossfire and SRT6 Resource
Opening the intercooler
Opening the intercooler
0 2012/10/28 12:16:15
Rework done at the factory
Rework done at the factory
0 2012/10/28 12:16:15
Sample I/C ready for analysis - cutup.
Sample I/C ready for analysis - cutup.
0 2012/10/28 18:15:04
Inlet view of I/C
Inlet view of I/C
0 2012/10/28 18:15:04
Outlet contamination due to leak in core.
Outlet contamination due to leak in core.
0 2012/10/28 18:15:04
Please note the flow of water in the intercooler, it is serial on three passes or loops thru the air path
Please note the flow of water in the intercooler, it is serial on three passes or loops thru the air path
0 2012/10/29 10:31:13
Note the cold water enters the top right and exits on the bottom left pipe.
Note the cold water enters the top right and exits on the bottom left pipe.
0 2012/10/29 10:31:13
More ugly rework at the factory. DO NOT become concerned with the closed ports, the cutting process left flashings on the ends of the tubes where the blades hit the tubing, they were all open, cutting did the mushing of the ends, flashing picks off easily. Woody
More ugly rework at the factory. DO NOT become concerned with the closed ports, the cutting process left flashings on the ends of the tubes where the blades hit the tubing, they were all open, cutting did the mushing of the ends, flashing picks off easily. Woody
0 2012/10/29 10:31:13
Another view of the heat exchanger pipes in the I/C - brutal mess...
Another view of the heat exchanger pipes in the I/C - brutal mess...
0 2012/10/29 10:34:51
NASTY, this is in our cars, but I have a plan and will test a fix.
NASTY, this is in our cars, but I have a plan and will test a fix.
0 2012/10/29 10:34:51
Open kimona of a heat exchanger, the I/C. Take a look see.
Open kimona of a heat exchanger, the I/C. Take a look see.
0 2012/10/29 10:34:51
IC as received 2
IC as received 2
0 2012/11/03 10:22:17
IC sawn open 2
IC sawn open 2
0 2012/11/03 10:22:17
dirty outlet section seen from IC's point of view
dirty outlet section seen from IC's point of view
0 2012/11/03 10:22:17
rewelding cleaned case back together
rewelding cleaned case back together
0 2012/11/03 10:25:03
washed core
washed core
0 2012/11/03 10:25:03
IC opening 3
IC opening 3
0 2012/11/03 10:25:03
IC inlet dirty
IC inlet dirty
0 2012/11/03 10:50:23
vacuuming heat out of welded core after reassembly..
vacuuming heat out of welded core after reassembly..
0 2012/11/12 14:12:12
washed core shiny fins
washed core shiny fins
0 2012/11/12 14:12:12
Washed 4 times, soap n water, chemical cleaner, lacquer thinner twice, acetone rinsed.
Washed 4 times, soap n water, chemical cleaner, lacquer thinner twice, acetone rinsed.
0 2012/11/12 14:12:12
Location of casting fault
Location of casting fault
0 2012/11/16 13:21:27
Leak found at the factory weld line of case
Leak found at the factory weld line of case
0 2012/11/16 13:21:27
Leak at corner
Leak at corner
0 2012/11/16 13:21:27
Sectioned IC for testing of pressure capacity of water side. Will be used for testing of single pass water restriction in a real SRT.
Sectioned IC for testing of pressure capacity of water side. Will be used for testing of single pass water restriction in a real SRT.
0 2012/11/16 13:21:27
90 series pump
90 series pump
0 2012/11/25 16:52:13
IC test bed
IC test bed
0 2012/12/19 18:09:57
relay wiring
relay wiring
0 2012/12/22 08:03:38