TVT Design Rear Camber Arms
Re: TVT Design Rear Camber Arms
Originally Posted by TVT_DESIGN
Yes, the bushings go on either side of the rod ends and secure it into place. The rods are RH/LH threaded, so the pieces only fit in one way.
Only 3 left
Only 3 left
Re: TVT Design Rear Camber Arms
Originally Posted by MikeR
32, there are some good pic's of them installed in the link by newCrossfire in post #69..
Re: TVT Design Rear Camber Arms
Originally Posted by TVT_DESIGN
you should have eight bushings. I only had enough bushings for the sets I made and have none left. Check all the packaging carefully.
Re: TVT Design Rear Camber Arms
Originally Posted by GDrag
Whaat? How come?
https://www.crossfireforum.org/forum...r-members.html
Last edited by onehundred80; 03-25-2010 at 05:29 PM.
Re: TVT Design Rear Camber Arms
i just read all the threads and MAN!!! i have to say i never purchased anything from tvt_design until the camber bars came out. i paypaled for them and received them in short order. i then purchased konis, springs and pads from him. he asked for a cashiers check to keep the credit card fees from cutting into his profit and because he seemed like an upstanding sponser and my prior purchase was great i sent it.
it took a week or so but 2 days ago i received all my parts in excellent condition.
i sincerely hope this is a giant misunderstanding and anthony returns to the forum.
it took a week or so but 2 days ago i received all my parts in excellent condition.
i sincerely hope this is a giant misunderstanding and anthony returns to the forum.
Re: TVT Design Rear Camber Arms
Originally Posted by FP
Nothing should stop you guys from buying from Anthony. Some of us had a good experience. .
read the mbworld threads regarding e/c and tuning. its giving people pause for thought whether true or not.
my experience with tvt was a good one. but until this is figured out i wont risk my money simply because n.j. is so far away. to deal over the web a certain amount of trust is needed. for now caution is easier than trusting