No high beams
Re: No high beams
Sounds like another "multi-function" switch failure. I replaced mine last week ....... was at first overwhelmed but this forum is awesome with info and links. There is even a how to repair the faulty switch!!!
I chose to buy a new switch and install it (found it on a sale for like $200.00 Ebay has them for under $100). I took my old switch apart and fixed it (now on shelf for who knows what)........... I would send it to you should you desire.
I chose to buy a new switch and install it (found it on a sale for like $200.00 Ebay has them for under $100). I took my old switch apart and fixed it (now on shelf for who knows what)........... I would send it to you should you desire.
Re: No high beams
Check out this link https://www.pelicanparts.com/techart...el_Removal.htm
and this one https://www.pelicanparts.com/techart...eplacement.htm
You need not remove the hood release or the plug-in from the trim panel; just let it hang (picture #10 and #11)
There are other links on this site to R and R this switch ... I felt warm and fuzzy using these two links and printing out the pictures for reference as I progressed.
One further note: The yellow air bag plug just pries out from the silver mount (picture #3).
I had to use an air impact to remove the 10mm allen bolt at the steering wheel (rent an electric one if you have no access).
This was a bit out of my wheel house. I wanted to use a NEW switch so I would not have any issue with a possible used bad switch.
and this one https://www.pelicanparts.com/techart...eplacement.htm
You need not remove the hood release or the plug-in from the trim panel; just let it hang (picture #10 and #11)
There are other links on this site to R and R this switch ... I felt warm and fuzzy using these two links and printing out the pictures for reference as I progressed.
One further note: The yellow air bag plug just pries out from the silver mount (picture #3).
I had to use an air impact to remove the 10mm allen bolt at the steering wheel (rent an electric one if you have no access).
This was a bit out of my wheel house. I wanted to use a NEW switch so I would not have any issue with a possible used bad switch.
Last edited by Oldschool; 03-19-2020 at 02:04 PM. Reason: more info
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)