Starter not cranking, computer reset fixes the problem
Thread Starter
Joined: Dec 2016
Posts: 12
Likes: 0
From: Austin, Tx
Starter not cranking, computer reset fixes the problem
Last night my 05 Coupe left me stranded. When I tried to start it, the engine started running but then sputtered and died. When I tried to restart it, the starter wouldn't work. No click, nothing. All other electricals seemed fine. Jumping did not work, not even a click. I had it towed to my mechanic (Mercedes specialist) and he said that after pulling the battery to reset the engine control computer, it now starts. The only problem is, he does not have the equipment to read the Chrysler diagnostic codes.
Anyone else seen this? Am I likely to see this again? I'm considering taking it to the local Chrysler dealer to have them read the diagnostic codes, but wondering if there is any point.
Anyone else seen this? Am I likely to see this again? I'm considering taking it to the local Chrysler dealer to have them read the diagnostic codes, but wondering if there is any point.
Administrator
Joined: Jun 2009
Posts: 13,588
Likes: 974
From: Fort Worth, Texas
Re: Starter not cranking, computer reset fixes the problem
Yea, take it to the dealer - that will fix everything.... (See my sigline.)
Ok, search "Mystery No Start", the engine control relay output from the RCM, if it fails, means the engine quits running and the starter won't engage. Sounds like you have what is about the most common "my car left me stranded" complaint on this forum.
And there are no codes to read when this happens, it is what the I.T. people would call a "layer 1" problem.
Ok, search "Mystery No Start", the engine control relay output from the RCM, if it fails, means the engine quits running and the starter won't engage. Sounds like you have what is about the most common "my car left me stranded" complaint on this forum.
And there are no codes to read when this happens, it is what the I.T. people would call a "layer 1" problem.
Last edited by pizzaguy; 01-04-2019 at 12:14 PM.
Thread Starter
Joined: Dec 2016
Posts: 12
Likes: 0
From: Austin, Tx
Joined: Jun 2017
Posts: 288
Likes: 11
From: Austin
Re: Starter not cranking, computer reset fixes the problem
I sent a PM to you asking about the Mercedes mechanic since I'm in Austin, too. But mainly I wanted to say, if Pizzaguy tells you something, it's solid gold. I'd recommend reading all of his posts.
Thread Starter
Joined: Dec 2016
Posts: 12
Likes: 0
From: Austin, Tx
Re: Starter not cranking, computer reset fixes the problem
I sent you a PM, but very glad to share for others in Austin who might be interested.
I've been using Chuck the Mechanic:
Chuck the mechanic | Factory Trained Technician
Very good reviews on Yelp, and I've been very satisfied as well.
I've been using Chuck the Mechanic:
Chuck the mechanic | Factory Trained Technician
Very good reviews on Yelp, and I've been very satisfied as well.
Senior Member
Joined: Apr 2006
Posts: 25,429
Likes: 613
From: Ontario
Re: Starter not cranking, computer reset fixes the problem
Yea, take it to the dealer - that will fix everything.... (See my sigline.)
Ok, search "Mystery No Start", the engine control relay output from the RCM, if it fails, means the engine quits running and the starter won't engage. Sounds like you have what is about the most common "my car left me stranded" complaint on this forum.
And there are no codes to read when this happens, it is what the I.T. people would call a "layer 1" problem.
Ok, search "Mystery No Start", the engine control relay output from the RCM, if it fails, means the engine quits running and the starter won't engage. Sounds like you have what is about the most common "my car left me stranded" complaint on this forum.
And there are no codes to read when this happens, it is what the I.T. people would call a "layer 1" problem.
Read this PDF CLICK for full details and repair of poor solder connections.
Look at the contacts on the relay as stated above, if they are burnt replace it.
Last edited by onehundred80; 01-04-2019 at 07:17 PM.
Senior Member
Joined: Apr 2006
Posts: 25,429
Likes: 613
From: Ontario
Re: Starter not cranking, computer reset fixes the problem
Could you put into one post what exactly is wrong with the car?
What you have done and what caused you to write in the first place.
It appears to me that we have lost sight of your problems and confusion causes people to just give up and not reply.
What you have done and what caused you to write in the first place.
It appears to me that we have lost sight of your problems and confusion causes people to just give up and not reply.
Thread Starter
Joined: Dec 2016
Posts: 12
Likes: 0
From: Austin, Tx
Re: Starter not cranking, computer reset fixes the problem
To date, the problem has not yet resurfaced. When I get the time I'll pull the relay module mentioned about and try cleaning up the solder joints. In the meantime, if it happens again, I'll perform a reset of the computer by disconnecting the battery.
Senior Member
Joined: Nov 2011
Posts: 1,284
Likes: 27
From: Alma, MI
Thread
Thread Starter
Forum
Replies
Last Post
Goldwing
Troubleshooting & Technical Questions & Modifications
2
03-30-2018 06:23 PM
RyanB
All Crossfires
8
03-10-2015 12:30 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)