CrossfireForum - The Chrysler Crossfire and SRT6 Resource
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

CrossfireForum - The Chrysler Crossfire and SRT6 Resource (https://www.crossfireforum.org/forum/)
-   Troubleshooting & Technical Questions & Modifications (https://www.crossfireforum.org/forum/troubleshooting-technical-questions-modifications/)
-   -   EvoSport Phenolic Intake Spacers??? (https://www.crossfireforum.org/forum/troubleshooting-technical-questions-modifications/17858-evosport-phenolic-intake-spacers.html)

Haywood 09-19-2007 05:19 PM
Re: EvoSport Phenolic Intake Spacers???
 
Originally Posted by SRT6_Roadster
Your test only shows that surface temp on the manifold has been decreased. How is your intake air temp compare pre and post install? How are your trap speeds on the drag strip pre & post install?
It's a road course, so no drag times. I also have a 180 degree t-stat. It definitely helped keep the internal temp lower and almost eliminate heat soak. My runs were very consistent and didn't lose any speed down the straight-aways. There are a lot smarter guys in that thread I posted who have used them at the drag strip and swear they are taking tenths off.

RPM 09-19-2007 05:52 PM
Re: EvoSport Phenolic Intake Spacers???
 
Hmm. I may do these before I go w/the Renntech kit (whenever that may be) . . . ;)
I wish Renntech made a set, per previous posts, etc. - Not sure I want to go w/Evosport stuff.

Maxwell 09-19-2007 06:30 PM
Re: EvoSport Phenolic Intake Spacers???
 
are these phenolic spacers useable on the N/A motors or is it strictly S/C engine?


All times are GMT -4. The time now is 10:28 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands