When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
New Member IntroductionsWelcome new members !!
This is the place to post a new thread and introduce yourself and tell us a little about yourself and what model Crossfire you just bought or are looking to buy.
Threads created for anything other than introductions are subject to be moved to the appropriate section in the forum for the topic being posted.
Hi
Occasionally the vehicle stops. The temperature display shows zero, the cooling fan is running at maximum.When I turn contacts , The engine is not spinning. Sometimes after a few attempts, sometimes after 5-10 minutes starting.
can you help me..! Please
The engine stopping and the cooling fan running at high speed mean that the "Engine Control Relay" output from the Relay control Module is not getting to the ECM.
THis is almost always a failure in the Relay Control Module. One of two issues is happening:
The Engine Control Relay's contacts are bad.
The solder somewhere on the board in the Engine Control Relay's path is fractured.