Brembo 4 piston calipers for sale.
Brembo 4 piston calipers for sale.
I watched ebay like a hawk in order to get these calipers at a decent price.
I now own 3 sets of front calipers because I'm OCD. First I bought the 330 calipers to use with my stock front rotors. Then I decided to buy the 345's instead to match the rear rotors I bought from Rudy (that came with the 4 piston rear calipers). Next I found a set of CLK55 calipers (six piston), and decided to pull the trigger since they are very hard to find. The end result, two sets of calipers for sale.
- Brembo 4 piston 330mm Calipers
Work with the stock SRT6 rotors.
You'll need a few washers to center the calipers on your rotors.
I'd like to get $245 shipped.
- Brembo 4 piston 345mm Calipers
Work with the C32 rotors.
You'll need a few washers to center the calipers on your rotors.
SOLD.
I now own 3 sets of front calipers because I'm OCD. First I bought the 330 calipers to use with my stock front rotors. Then I decided to buy the 345's instead to match the rear rotors I bought from Rudy (that came with the 4 piston rear calipers). Next I found a set of CLK55 calipers (six piston), and decided to pull the trigger since they are very hard to find. The end result, two sets of calipers for sale.
- Brembo 4 piston 330mm Calipers
Work with the stock SRT6 rotors.
You'll need a few washers to center the calipers on your rotors.
I'd like to get $245 shipped.
- Brembo 4 piston 345mm Calipers
Work with the C32 rotors.
You'll need a few washers to center the calipers on your rotors.
SOLD.
Last edited by grip grip; 03-20-2013 at 05:29 PM.
Re: Brembo 4 piston calipers for sale.
Anthony, if I were to get some SRT front rotors I should be able to bolt the 330mm calipers on to my Limited with simply adding a few spacers to center the caliper correct?
If I were to look for the 345mm rotors I would need to look for C32 rotors right?
Are there any mods necessary to fit 345's on an NA?
Thanks in advance!
If I were to look for the 345mm rotors I would need to look for C32 rotors right?
Are there any mods necessary to fit 345's on an NA?
Thanks in advance!
Re: Brembo 4 piston calipers for sale.
Anthony, if I were to get some SRT front rotors I should be able to bolt the 330mm calipers on to my Limited with simply adding a few spacers to center the caliper correct?
If I were to look for the 345mm rotors I would need to look for C32 rotors right?
Are there any mods necessary to fit 345's on an NA?
Thanks in advance!
If I were to look for the 345mm rotors I would need to look for C32 rotors right?
Are there any mods necessary to fit 345's on an NA?
Thanks in advance!
That's correct.
Re: Brembo 4 piston calipers for sale.
Since there doesn't seem to be any interest in the 330mm calipers the way they were, I decided to paint them and apply the AMG decals. They aren't perfect, but they are very nice once installed from a couple feet away.
$245 Shipped with pad retainers and pins. Pads are toast.
These work with a few washers on the front of the SRT with the stock rotors and weigh 8lbs less each.
$245 Shipped with pad retainers and pins. Pads are toast.
These work with a few washers on the front of the SRT with the stock rotors and weigh 8lbs less each.
Last edited by grip grip; 03-20-2013 at 10:12 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Big Daddy
WTB - Items/Parts Wanted to Buy - Archive
0
09-10-2015 10:21 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)