Parts/Accessories for sale - Archive This forum is no longer accepting new listings. Go to **the *new* Crossfire Marketplace**

FS - 2005 SRT6 rolling chassis

 
Thread Tools
 
Search this Thread
 
  #1 (permalink)  
Old 02-12-2016 | 11:33 AM
MrMoPar's Avatar
Thread Starter
|
www.TheCrossfireShop.com
Joined: May 2011
Posts: 577
Likes: 3
From: NW Ohio
Default FS - 2005 SRT6 rolling chassis

I have a black 55K mile 2005 SRT6 rolling chassis I need to get out of my garage.

It was hit in the passenger front outside of the frame rail. This is a parts vehicle only, cannot be rebuilt, have paper work.

No front sheet metal, front fascia, windshield trim, etc., no engine, no electronics/electrical unless mentioned below.

What it does have; (major items)

Body wiring harness, fuse box, full suspension, full exhaust, transmission, driveshaft, rear differential, rear half shafts, fuel system, fuel tank, ABS pump and control module, brake booster and master cylinder, brake lines, rotors (no calipers), hubs, control arms, steering gear box and steering linkage, steering column, sitting on four 19” rims (fair condition).

Bodyparts;

Driver side door undamaged but has scratch in paint, rear quarters good, rear fascia good, rear hatch good (no wing or SRT6 logo, has CROSSFIRE letters), passenger door sheet metal is damaged.

Both doors have air bags, window glass, regulator and motor. Driver door no door panel, passenger door has door panel, both have lower speaker, door latches, door handles. Roof section is good. Rear quarter windows good, rear hatch good. Side mirrors included on doors.


UPDATE: does include driver side front fender with silver trim. No exterior damage, the inside vertical mounting flange that bolts to the inner fender well is sprung next to the windshield. If it is actually bent, easily straightened by a body shop on their sheet metal brake. Also included is the driver side plastic lower rocker panel cover also in good shape.

Interior

Both seats good, has major Black dash panels, (no console or silver trim, no steering wheel or lock assembly), as mentioned, has passenger side door panel, (no headliner or visors). Does have the inside rear quarter window trim and the trim piece that goes across the bulkhead behind the seats, rear storage area trim panels, carpet.

Lots of other small parts too numerous to list.

This can be rolled up onto a trailer, or could be towed on a tow dolly.

$1200 firm, you pick up in 43452 area. The tranny, rear end, half shafts alone are worth the price. I am listing this at this price to get it moved, my loss is yourgain.

PM me or text me (fastest) 419*573*2122
 

Last edited by MrMoPar; 02-12-2016 at 12:55 PM. Reason: Updated details
  #2 (permalink)  
Old 02-12-2016 | 05:31 PM
philosophico's Avatar
Forum Regular
Joined: May 2013
Posts: 500
Likes: 27
Default Re: FS - 2005 SRT6 rolling chassis

Well, before and if/when you unload this, do you have the fuel filter/pump cover shield and are you willing to sell that part? When I bought my car mine was hacked like some clown literally didnt have the time to unscrew it to get to the filter so they took some shears and cut a massive part out of it to expose the filter/pump.
 
  #3 (permalink)  
Old 02-12-2016 | 06:20 PM
MrMoPar's Avatar
Thread Starter
|
www.TheCrossfireShop.com
Joined: May 2011
Posts: 577
Likes: 3
From: NW Ohio
Default Re: FS - 2005 SRT6 rolling chassis

Originally Posted by philosophico
Well, before and if/when you unload this, do you have the fuel filter/pump cover shield and are you willing to sell that part? When I bought my car mine was hacked like some clown literally didnt have the time to unscrew it to get to the filter so they took some shears and cut a massive part out of it to expose the filter/pump.
I have a couple of those shields off already, let me check to see if here or in storage and will get back to you.
 
  #4 (permalink)  
Old 02-12-2016 | 07:50 PM
Squirrel Crusher's Avatar
Senior Member
Joined: Oct 2007
Posts: 1,530
Likes: 6
From: Charlotte,NC
Default Re: FS - 2005 SRT6 rolling chassis

Hey Tim..Your wife making you clean up or you clearing space for another car? Squirrel Crusher
 
  #5 (permalink)  
Old 02-12-2016 | 09:48 PM
MrMoPar's Avatar
Thread Starter
|
www.TheCrossfireShop.com
Joined: May 2011
Posts: 577
Likes: 3
From: NW Ohio
Default Re: FS - 2005 SRT6 rolling chassis

Neither, just need to clean out my garage.
 
  #6 (permalink)  
Old 02-16-2016 | 02:40 PM
philosophico's Avatar
Forum Regular
Joined: May 2013
Posts: 500
Likes: 27
Default Re: FS - 2005 SRT6 rolling chassis

Originally Posted by MrMoPar
I have a couple of those shields off already, let me check to see if here or in storage and will get back to you.
Any updates?
 
  #7 (permalink)  
Old 02-22-2016 | 01:16 PM
MrMoPar's Avatar
Thread Starter
|
www.TheCrossfireShop.com
Joined: May 2011
Posts: 577
Likes: 3
From: NW Ohio
Default Re: FS - 2005 SRT6 rolling chassis

Originally Posted by philosophico
Any updates?
I did find a shield last night in the parts bin. Text me at 4195732122 for details.
 
  #8 (permalink)  
Old 02-23-2016 | 03:19 PM
FiftyThree033's Avatar
Joined: Mar 2010
Posts: 112
Likes: 0
Default Re: FS - 2005 SRT6 rolling chassis

Is the exhaust system available...cat back?
Steve
 
  #9 (permalink)  
Old 03-15-2016 | 10:05 PM
xfire17's Avatar
Joined: Apr 2007
Posts: 36
Likes: 0
From: Wildwood, Tx
Default Re: FS - 2005 SRT6 rolling chassis

Looking for the hose that comes from the radiator to the suction of the I/C pump. I'll give you a healthy sum for it....thanks, Kirk
 
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mike-in-Orange
Interior
23
06-14-2019 03:01 PM
Crossfire Princess
Exterior & Lighting
20
04-08-2011 07:32 PM
crossfirefrank
Crossfire Roadster
12
05-06-2007 08:49 PM
kaeXo
Crossfire Coupe
1
12-25-2006 12:59 PM
Scott_lmtd
Audio, Video and Electronics
6
09-22-2005 08:40 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 02:42 AM.