Group buy / crossfire custom stainless steel wire mesh grilles
Re: Group buy / crossfire custom stainless steel wire mesh grilles
I just answered your PM. I'll have Zunsport file a claim with FedEx and reproduce your order. I'll keep you advised . . . Happy New Year . . .
Group buy / crossfire custom stainless steel wire mesh grilles
onehundred80, I received my NOS right front lower grill a few days ago. It seemed to me that it snapped in real tight. That said, I wonder what happened to it in the first place. Apparently it arrived with it missing.
I hope I never need to find out, but it occurred to me that if someone slightly smacked a post in the front or just accidentally parked too close to a wall and pushed the front up against it - in either case, could it distort the front plastic unit to warp enough to pop one or both of the lower vents out?
though most likely it would probably take a pretty hard smack. Does the front unit's plastic have a memory so if it takes a fairly hard smack at low speed, it pops back, or does one then need to run down to their neighborhood Chrysler dealer and pick up a new one? (I don't do happy faces).
Biba
I hope I never need to find out, but it occurred to me that if someone slightly smacked a post in the front or just accidentally parked too close to a wall and pushed the front up against it - in either case, could it distort the front plastic unit to warp enough to pop one or both of the lower vents out?
though most likely it would probably take a pretty hard smack. Does the front unit's plastic have a memory so if it takes a fairly hard smack at low speed, it pops back, or does one then need to run down to their neighborhood Chrysler dealer and pick up a new one? (I don't do happy faces).
Biba
Re: Group buy / crossfire custom stainless steel wire mesh grilles
Re: Group buy / crossfire custom stainless steel wire mesh grilles
Yes sir, I prefer the expanded mesh and center spine........I'll take two please!
Re: Group buy / crossfire custom stainless steel wire mesh grilles
Contact Peter at Zunsport. I'm sure they can do it for you!
Re: Group buy / crossfire custom stainless steel wire mesh grilles
With these side strakes.
Last edited by onehundred80; 12-27-2013 at 09:54 AM. Reason: Resized photo.
Re: Group buy / crossfire custom stainless steel wire mesh grilles
Re: Group buy / crossfire custom stainless steel wire mesh grilles
I made a center spine for mine, dramatically changes the look. Would buy the side strakes in a New York minute.
Re: Group buy / crossfire custom stainless steel wire mesh grilles
New York Minute :
The smallest measurable amount of time in the universe. Approximately equal to the time between a traffic light turning green in New York City and the cab driver behind you honking his horn.
Re: Group buy / crossfire custom stainless steel wire mesh grilles
Side strake wallpaper.
Detroit Auto Show 2001
Crossfire Auto show blurb
Chrysler Design Institute screen saver
Detroit Auto Show 2001
Crossfire Auto show blurb
Chrysler Design Institute screen saver
Last edited by onehundred80; 12-28-2013 at 11:34 AM.
Re: Group buy / crossfire custom stainless steel wire mesh grilles
So who's going to quarterback a group buy??
(not me) Before you say it......
(not me) Before you say it......
Group buy / crossfire custom stainless steel wire mesh grilles
If the strakes are also stainless, they not only appear to be two piece, but of course there are three lengths which also applies to the upper parts. Assuming they are at least the same, left to right, that still calls for six stamping molds. Not to mention that fasteners would need to be welded onto the backs. The grills themselves should be a relative piece of cake.
Where did these actual ones come from? I'd find it hard to believe that they are photorealism. There should be stamping molds somewhere...or not.
Regarding the center spines, I agree they do enhance the silver grills. I'm fine without them on my black grill, which is on my black XF.
Biba
Where did these actual ones come from? I'd find it hard to believe that they are photorealism. There should be stamping molds somewhere...or not.
Regarding the center spines, I agree they do enhance the silver grills. I'm fine without them on my black grill, which is on my black XF.
Biba
Re: Group buy / crossfire custom stainless steel wire mesh grilles
If the strakes are also stainless, they not only appear to be two piece, but of course there are three lengths which also applies to the upper parts. Assuming they are at least the same, left to right, that still calls for six stamping molds. Not to mention that fasteners would need to be welded onto the backs. The grills themselves should be a relative piece of cake.
Where did these actual ones come from? I'd find it hard to believe that they are photorealism. There should be stamping molds somewhere...or not.
Regarding the center spines, I agree they do enhance the silver grills. I'm fine without them on my black grill, which is on my black XF.
Biba
Where did these actual ones come from? I'd find it hard to believe that they are photorealism. There should be stamping molds somewhere...or not.
Regarding the center spines, I agree they do enhance the silver grills. I'm fine without them on my black grill, which is on my black XF.
Biba
I am thinking the grille itself came from there as well of course.
There are a total of 3 + 3 strake assemblies, and 2 grilles + the grille backing wires if they are independently attached to the slit front portion.
The set would certainly get my attention.
Until then ....
Last edited by onehundred80; 12-27-2013 at 07:49 PM.
Join Date: Jun 2008
Location: Spacecoast, Florida
Age: 67
Posts: 1,851
Likes: 0
Received 14 Likes
on
11 Posts
Re: Group buy / crossfire custom stainless steel wire mesh grilles
Well, I just got a FEDEX Duty and Tax Invoice in the mail for $14.68. Dept. Of The Treasury/ US Customs Service customs duty fee of $8.18 + some sort of Advancement Fee of $6.50. This is the first time I've ever been requested to pay duty tax on overseas purchases. I guess this is just one way the government will make us pay for Obamacare.
So much for the over 20 buyers discount!
So much for the over 20 buyers discount!
Re: Group buy / crossfire custom stainless steel wire mesh grilles
I'd be surprised, side grilles have been around since the '50s. If made functional and stainless I suspect that would be enough differences but might want to ask a lawyer.
ps I just received the same from fedex but for $12.65 - $6.15 duty and $6.50 Fedex fee for processing the $6.15 (upper grille only). I thought all fees were being paid by the shipper.
please have the shipper investigate.
ps I just received the same from fedex but for $12.65 - $6.15 duty and $6.50 Fedex fee for processing the $6.15 (upper grille only). I thought all fees were being paid by the shipper.
please have the shipper investigate.
Last edited by Padgett; 12-30-2013 at 12:33 PM.
Re: Group buy / crossfire custom stainless steel wire mesh grilles
Well, I just got a FEDEX Duty and Tax Invoice in the mail for $14.68. Dept. Of The Treasury/ US Customs Service customs duty fee of $8.18 + some sort of Advancement Fee of $6.50. This is the first time I've ever been requested to pay duty tax on overseas purchases. I guess this is just one way the government will make us pay for Obamacare.
So much for the over 20 buyers discount!
So much for the over 20 buyers discount!