Parts/Accessories for sale - Archive This forum is no longer accepting new listings. Go to **the *new* Crossfire Marketplace**

Feeler for part-out

 
Thread Tools
 
Search this Thread
 
  #41 (permalink)  
Old 11-28-2011 | 06:14 PM
chuK_138's Avatar
Senior Member
Joined: Jun 2011
Posts: 1,324
Likes: 3
From: Winter Park, FL
Default Re: Feeler for part-out

Originally Posted by MrMoPar
Boilerup may have asked for these if they are attached to the trim below the quarter glass.
D@mn the luck! Well, if they aren't, I'm asking.
 
  #42 (permalink)  
Old 11-28-2011 | 06:19 PM
MrMoPar's Avatar
www.TheCrossfireShop.com
Joined: May 2011
Posts: 577
Likes: 3
From: NW Ohio
Default Re: Feeler for part-out

Two items you may have missed, silver fender stakes and rear hatch glass. But can talk about with chassis discussion.
 
  #43 (permalink)  
Old 11-28-2011 | 10:53 PM
Erzer's Avatar
Senior Member
Joined: Dec 2007
Posts: 2,123
Likes: 0
Default Re: Feeler for part-out

The only thing good about those photo's is the other drivers car on its roof...otherwise it is painful to see as that was a beautiful car. Sent you a PM with my contact info.

Please get another and get back to the Dragon safely.
 
  #44 (permalink)  
Old 11-28-2011 | 11:12 PM
JHM2K's Avatar
Thread Starter
|
Senior Member
Joined: Dec 2006
Posts: 6,349
Likes: 14
From: Murfreesboro, TN
Default Re: Feeler for part-out

Originally Posted by MrMoPar
Two items you may have missed, silver fender stakes and rear hatch glass. But can talk about with chassis discussion.
Just got back in tonight, it's late and hitting the bed soon. Tell me a good time to call you tomorrow and we'll discuss in detail. Strakes are unharmed... Hatch glass is also unharmed. Not sure if it can be easily separated from hatch... Might be worth a trip for you to come down here, as shipping on all related components will be murder.

Chuck -- I think Boiler was needing the rear plastic pieces that cover the C-pillar, not the bulkhead. John, can you confirm? If so, the bulkhead cover is yours.

To all -- I am continuing to research prices to give fair deals. I don't want to give away a $300 part an not know it; I also don't want to charge you $75 for a $15 part.

As a general rule, I'm pricing all parts at 20-30% below the price you would get on parts.com (which offers 30% off OE prices) which I think is fair for all cosmetic items/switchgear. Items that are heavily worn or negligible in impact will be given a severe discount, or FOC (free of charge).
 
  #45 (permalink)  
Old 11-28-2011 | 11:49 PM
MrMoPar's Avatar
www.TheCrossfireShop.com
Joined: May 2011
Posts: 577
Likes: 3
From: NW Ohio
Default Re: Feeler for part-out

Originally Posted by JHM2K
Just got back in tonight, it's late and hitting the bed soon. Tell me a good time to call you tomorrow and we'll discuss in detail. Strakes are unharmed... Hatch glass is also unharmed. Not sure if it can be easily separated from hatch... Might be worth a trip for you to come down here, as shipping on all related components will be murder.

Chuck -- I think Boiler was needing the rear plastic pieces that cover the C-pillar, not the bulkhead. John, can you confirm? If so, the bulkhead cover is yours.

To all -- I am continuing to research prices to give fair deals. I don't want to give away a $300 part an not know it; I also don't want to charge you $75 for a $15 part.

As a general rule, I'm pricing all parts at 20-30% below the price you would get on parts.com (which offers 30% off OE prices) which I think is fair for all cosmetic items/switchgear. Items that are heavily worn or negligible in impact will be given a severe discount, or FOC (free of charge).
Anytime after 5 pm est.
 
  #46 (permalink)  
Old 11-29-2011 | 01:42 AM
devilduck's Avatar
Joined: Mar 2005
Posts: 53
Likes: 0
From: Seattle
Thumbs up Re: Feeler for part-out

John-
I know mine is small stuff- but it is unavailable.On backorder from dealer.

I need the front blinker bulb housing (30 degree turn and it comes out in your hand).
Dealer wants $35 for it- I am happy to pay whatever you say is reasonable. I could send a prepaid bubble wrap envelope if it helps. Missing 2 rubber covers, but those I can get from the dealer if he can figure out what I'm talkin about.
Thanks
Enjoy the Day
Chuck
 
  #47 (permalink)  
Old 11-29-2011 | 08:06 AM
BoilerUpXFire's Avatar
Senior Member
Joined: Jan 2009
Posts: 6,285
Likes: 4
From: Carmel, In.
Default Re: Feeler for part-out

Originally Posted by MrMoPar
I don't have big issue with headliner, if you are going to strip one, I would be interested in the fabric, or possibly your headliner if you are not going to reuse it.
I only need one, and depending on the price/condition of John's, I am sure we can work something out for us to both be happy. Keep us posted, John, I am sure there is a lot on your plate at the moment, thanks for helping out...
 
  #48 (permalink)  
Old 11-29-2011 | 10:13 AM
Mrmiata's Avatar
Senior Member
Joined: Sep 2011
Posts: 9,595
Likes: 22
From: Kellyville, Ok
Default Re: Feeler for part-out

Could you put one of the clips that hold the fan shroud on in your pocket till we cross paths or otherwise?(two on the top side) It's a trivial part.. but slighty irritating to be missing one.
 
  #49 (permalink)  
Old 11-29-2011 | 02:20 PM
Tjb421's Avatar
Joined: Jun 2011
Posts: 91
Likes: 0
From: Mobile, Alabama
Default Re: Feeler for part-out

Originally Posted by JHM2K
For the believers out there, I still give full credit and glory to God for keeping us safe... crumple zones can only do so much. A witness said his Pacifica literally somersaulted over Kim's side of the car. My car basically acted like a ramp for his vehicle. The passenger compartment on my car was never touched.
Amen! obviously God has more left for both of you here with the rest of us. Glad yall are safe!
 
  #50 (permalink)  
Old 11-29-2011 | 02:47 PM
hcarter's Avatar
Senior Member
Joined: Apr 2009
Posts: 2,358
Likes: 5
From: Kingsport Tn.
Default Re: Feeler for part-out

John Did the accident get into the lower control arms ? if not I may be interested in taking them off your hands , ? I dont care about ball joints and such , if bad thats ok just need good straight L/C arms.. let me know..


thanks Howard.
 
  #51 (permalink)  
Old 11-29-2011 | 07:02 PM
32krazy!'s Avatar
Senior Member
Joined: Apr 2009
Posts: 5,349
Likes: 4
From: murfreesboro,tn
Default Re: Feeler for part-out

Originally Posted by Mrmiata
Could you put one of the clips that hold the fan shroud on in your pocket till we cross paths or otherwise?(two on the top side) It's a trivial part.. but slighty irritating to be missing one.
you can have the clip but you have to get at the dragon!!
 
  #52 (permalink)  
Old 11-29-2011 | 08:00 PM
JHM2K's Avatar
Thread Starter
|
Senior Member
Joined: Dec 2006
Posts: 6,349
Likes: 14
From: Murfreesboro, TN
Default Re: Feeler for part-out

Originally Posted by hcarter
John Did the accident get into the lower control arms ? if not I may be interested in taking them off your hands , ? I dont care about ball joints and such , if bad thats ok just need good straight L/C arms.. let me know..


thanks Howard.
PM replied bud!
 
  #53 (permalink)  
Old 11-29-2011 | 08:04 PM
oledoc2u's Avatar
Senior Member
Joined: Mar 2008
Posts: 14,593
Likes: 27
From: IN
Default Re: Feeler for part-out

John, Steve....when is the big tear down day? I am booked thru Sunday this week. I have a meeting on Tuesday I have to attend, I have a Christmas party the 10th. Pretty open for some time off after that. I have a bunch of small boxes I could donate for shipping the smaller items as well. Let me know what you guys are thinking. This sudden cold snowy weather sucks...but, I am up for a road trip... I see there may be a problem with the idiot not having insurance, but I would think Farm Bureau would give you a yea or ney fairly quickly...
 
  #54 (permalink)  
Old 11-29-2011 | 08:06 PM
32krazy!'s Avatar
Senior Member
Joined: Apr 2009
Posts: 5,349
Likes: 4
From: murfreesboro,tn
Default Re: Feeler for part-out

Originally Posted by oledoc2u
John, Steve....when is the big tear down day? I am booked thru Sunday this week. I have a meeting on Tuesday I have to attend, I have a Christmas party the 10th. Pretty open for some time off after that. I have a bunch of small boxes I could donate for shipping the smaller items as well. Let me know what you guys are thinking. This sudden cold snowy weather sucks...but, I am up for a road trip...
doc its up to john. when he settles with the ins and gets the price for the buy back. maybe another week?
 
  #55 (permalink)  
Old 11-29-2011 | 08:09 PM
oledoc2u's Avatar
Senior Member
Joined: Mar 2008
Posts: 14,593
Likes: 27
From: IN
Default Re: Feeler for part-out

That would be great....after this week and next, I am ready to get away for a few days...running my old cold butt off....lol....John may need ear muffs once we get started....lol
 
  #56 (permalink)  
Old 11-29-2011 | 08:15 PM
JHM2K's Avatar
Thread Starter
|
Senior Member
Joined: Dec 2006
Posts: 6,349
Likes: 14
From: Murfreesboro, TN
Default Re: Feeler for part-out

I'm thinking I should have at least the answers by the end of the week, and the car shortly thereafter. Lots of progress was made today, it's at the shop getting the "estimate". I told him to replace everything with genuine Chrysler parts and that I would expect nothing less than perfection. That's Greek for, "do everything you can to total it!"

No amount of repair would make me feel safe about driving that car again. None.

Not that I think it's an issue to worry about...

Bill -- Any boxes and assistance you'd be willing to provide would be greatly appreciated! We'd love to have you down!
 
  #57 (permalink)  
Old 11-29-2011 | 08:17 PM
oledoc2u's Avatar
Senior Member
Joined: Mar 2008
Posts: 14,593
Likes: 27
From: IN
Default Re: Feeler for part-out

sounds good, let me know....
 
  #58 (permalink)  
Old 11-29-2011 | 08:27 PM
chuK_138's Avatar
Senior Member
Joined: Jun 2011
Posts: 1,324
Likes: 3
From: Winter Park, FL
Default Re: Feeler for part-out

I don't need the long cover piece, but the side covers that I have an attached photo of. Both sides please, if they aren't what BoilerUp was looking for. And the wiper nut covers!!!! ThumperSRT-6 has been looking high and low for those. Would be nice to help him out.
 
Attached Thumbnails Feeler for part-out-pillarcover.jpg  

Last edited by chuK_138; 11-29-2011 at 08:29 PM.
  #59 (permalink)  
Old 11-29-2011 | 08:34 PM
Mrmiata's Avatar
Senior Member
Joined: Sep 2011
Posts: 9,595
Likes: 22
From: Kellyville, Ok
Default Re: Feeler for part-out

Originally Posted by 32krazy!
you can have the clip but you have to get at the dragon!!
Oh...don't give a reason to be there other than playing! It would be awesome to meet some of you and take that run. My only "drawback" is it's not just a little skip over from Tulsa.
And since I haven't ever been there... Do cops do any patrolling on there or just figure it's your life..? Sounds like it could be "group ticket" instead of group hug.. lol
 
  #60 (permalink)  
Old 11-29-2011 | 08:40 PM
32krazy!'s Avatar
Senior Member
Joined: Apr 2009
Posts: 5,349
Likes: 4
From: murfreesboro,tn
Default Re: Feeler for part-out

Originally Posted by Mrmiata
Oh...don't give a reason to be there other than playing! It would be awesome to meet some of you and take that run. My only "drawback" is it's not just a little skip over from Tulsa.
And since I haven't ever been there... Do cops do any patrolling on there or just figure it's your life..? Sounds like it could be "group ticket" instead of group hug.. lol
2 cops on the dragon. past fall a group of 5 to 10 cars spent 9 hrs ripping the back roads of tn to shreds. never saw a single cop and had speeds in excess of 140 mph in places. we let 13dog shake them out and the slow car in back gets to pick them up!
i picked my first slk32 up in vegas and drove it home in 2 days. 1881 miles. tulsa is just a joyride!
 


Quick Reply: Feeler for part-out



All times are GMT -4. The time now is 04:26 PM.