Crossfire won't start
Crossfire won't start
Hello All,
I am new here but have been following this site for several years and enjoy all of the information and the support everyone gives each other. My problem is my wife 2005 Crossfire failed to start after parking it. I have replaced the Crank Position Sensor with of from the parts store (not a Bosch, Will have to order) and removed the battery cables and it will crank twice and die each time. All of the lights, radio, windows will work. I can here the fuel pump when I turn the key to the start position. With no luck I pulled the RCM board and replaced with a new factory RCM board. The engine will still crank twice and go dead each time. What do I do now? I am lost at this point.
BWilson
I am new here but have been following this site for several years and enjoy all of the information and the support everyone gives each other. My problem is my wife 2005 Crossfire failed to start after parking it. I have replaced the Crank Position Sensor with of from the parts store (not a Bosch, Will have to order) and removed the battery cables and it will crank twice and die each time. All of the lights, radio, windows will work. I can here the fuel pump when I turn the key to the start position. With no luck I pulled the RCM board and replaced with a new factory RCM board. The engine will still crank twice and go dead each time. What do I do now? I am lost at this point.
BWilson
Re: Crossfire won't start
Hello All,
I am new here but have been following this site for several years and enjoy all of the information and the support everyone gives each other. My problem is my wife 2005 Crossfire failed to start after parking it. I have replaced the Crank Position Sensor with of from the parts store (not a Bosch, Will have to order) and removed the battery cables and it will crank twice and die each time. All of the lights, radio, windows will work. I can here the fuel pump when I turn the key to the start position. With no luck I pulled the RCM board and replaced with a new factory RCM board. The engine will still crank twice and go dead each time. What do I do now? I am lost at this point.
BWilson
I am new here but have been following this site for several years and enjoy all of the information and the support everyone gives each other. My problem is my wife 2005 Crossfire failed to start after parking it. I have replaced the Crank Position Sensor with of from the parts store (not a Bosch, Will have to order) and removed the battery cables and it will crank twice and die each time. All of the lights, radio, windows will work. I can here the fuel pump when I turn the key to the start position. With no luck I pulled the RCM board and replaced with a new factory RCM board. The engine will still crank twice and go dead each time. What do I do now? I am lost at this point.
BWilson
The crank-start-die two times then nothing is a symptom of the SKREEM module not the CPS. To confirm this disconnect the battery then try to start the car. You get crank-start-die two times? If you disconnect the battery again do you get the crank-start-die two times again? If yes SKREEM module.
Last edited by KDW4Him; 02-01-2016 at 10:46 PM.
Re: Crossfire won't start
Hello All,
I am new here but have been following this site for several years and enjoy all of the information and the support everyone gives each other. My problem is my wife 2005 Crossfire failed to start after parking it. I have replaced the Crank Position Sensor with of from the parts store (not a Bosch, Will have to order) and removed the battery cables and it will crank twice and die each time. All of the lights, radio, windows will work. I can here the fuel pump when I turn the key to the start position. With no luck I pulled the RCM board and replaced with a new factory RCM board. The engine will still crank twice and go dead each time. What do I do now? I am lost at this point.
BWilson
I am new here but have been following this site for several years and enjoy all of the information and the support everyone gives each other. My problem is my wife 2005 Crossfire failed to start after parking it. I have replaced the Crank Position Sensor with of from the parts store (not a Bosch, Will have to order) and removed the battery cables and it will crank twice and die each time. All of the lights, radio, windows will work. I can here the fuel pump when I turn the key to the start position. With no luck I pulled the RCM board and replaced with a new factory RCM board. The engine will still crank twice and go dead each time. What do I do now? I am lost at this point.
BWilson
If you have two keys try the other key.
Have you or anyone else been playing around under the dash?
You seem to have made the mistake of buying a RCM before you came here, you could have saved that money.
Use search and look for SKREEM, there is some current threads that have the latest info in them.
Click for SKREEM search.
Re: Crossfire won't start
Thanks for your support with this problem. To answer the first question to KDW4Him yes each time I Crank the car it starts twice and then dies. I disconnected the battery and reconnected the battery and again the car starts twice and dies twice. Onehundred80 no one has ever worked under the dash since I have owed the car for the past 3years. I will search for SKREEM as you mention. Is this a costly issue if it does turn out to be the SKREEM?
Re: Crossfire won't start
Thanks for your support with this problem. To answer the first question to KDW4Him yes each time I Crank the car it starts twice and then dies. I disconnected the battery and reconnected the battery and again the car starts twice and dies twice. Onehundred80 no one has ever worked under the dash since I have owed the car for the past 3years. I will search for SKREEM as you mention. Is this a costly issue if it does turn out to be the SKREEM?
Re: Crossfire won't start
Hello David, There wasn't any work preformed on the Crossfire before this issue. The battery is the same battery we have been using for the last 3 years with no issues. My wife said she pulled up to a stop sign and a light on the right side of the dash flashed quickly and went off. She drove the car about a quarter of a mile and stop the car and turned it off. After 30 minutes or so she tried to start the car and it clicked and the car would start. I took the battery cables off and waited a few minutes and connected the battery and then the engine would turn over and start, run for a second and die. It would crank and run for a second and two times then nothing. Each time I disconnect the battery it repeated the crank, start, die. I had the battery disconnected when I changed the CPS. I hope this helps
Re: Crossfire won't start
Hello David, There wasn't any work preformed on the Crossfire before this issue. The battery is the same battery we have been using for the last 3 years with no issues. My wife said she pulled up to a stop sign and a light on the right side of the dash flashed quickly and went off. She drove the car about a quarter of a mile and stop the car and turned it off. After 30 minutes or so she tried to start the car and it clicked and the car would start. I took the battery cables off and waited a few minutes and connected the battery and then the engine would turn over and start, run for a second and die. It would crank and run for a second and two times then nothing. Each time I disconnect the battery it repeated the crank, start, die. I had the battery disconnected when I changed the CPS. I hope this helps
Search using SKREEM and you'll find lots of info.
Basically, the security module and the chip in your key fob are no longer on speaking terms.
( This is not a common issue, and it sure ain't cheap to fix )
Re: Crossfire won't start
Hello David, There wasn't any work preformed on the Crossfire before this issue. The battery is the same battery we have been using for the last 3 years with no issues. My wife said she pulled up to a stop sign and a light on the right side of the dash flashed quickly and went off. She drove the car about a quarter of a mile and stop the car and turned it off. After 30 minutes or so she tried to start the car and it clicked and the car would start. I took the battery cables off and waited a few minutes and connected the battery and then the engine would turn over and start, run for a second and die. It would crank and run for a second and two times then nothing. Each time I disconnect the battery it repeated the crank, start, die. I had the battery disconnected when I changed the CPS. I hope this helps
Last edited by kingdavid54; 02-05-2016 at 11:58 PM.
Re: Crossfire won't start
Please bear with me just a little longer, by any chance did you happen to notice prior to this incident driving at night when you came to a stop did you notice a slight flicker of your instrument panel lights and/or headlights? And I noticed you said you've had the car about 3 years, did you put a battery in the car when you bought it?