Interior Any questions or information related to interior go in here.

I can't seem to get my airbag...

Thread Tools
 
  #1 (permalink)  
Old 06-05-2017 | 06:25 PM
wolf359loki's Avatar
Thread Starter
Joined: Jul 2016
Posts: 17
Likes: 0
From: Edmonton, AB
Angry I can't seem to get my airbag...

I am sure this has been asked and dealt with a million times, but I can seem to find it.

I need to remove my steering wheel and I got some directions from here and started. I was able to bet the screws loss for the air bag by turning the wheel left then right. Put it straight and unhooked the battery. After the wait time I go to unscrew the rest of the way and both screws now just spin free with no tension to remove or tighten. Did I break something? The screws were not that tight and i used my hand screw driver. There was tension when I started but now the just sping free and after an hour I give up. Am I suppose to pry up the air bag now or something?

Let me know what I am doing wrong, as I am worried about breaking a wire or a harness.
 
  #2 (permalink)  
Old 06-06-2017 | 07:56 AM
GraphiteGhost's Avatar
Senior Member
Joined: Jul 2009
Posts: 6,012
Likes: 516
From: Central South Carolina
Default Re: I can't seem to get my airbag......

Originally Posted by wolf359loki
I am sure this has been asked and dealt with a million times, but I can seem to find it.

I need to remove my steering wheel and I got some directions from here and started. I was able to bet the screws loss for the air bag by turning the wheel left then right. Put it straight and unhooked the battery. After the wait time I go to unscrew the rest of the way and both screws now just spin free with no tension to remove or tighten. Did I break something? The screws were not that tight and i used my hand screw driver. There was tension when I started but now the just sping free and after an hour I give up. Am I suppose to pry up the air bag now or something?

Let me know what I am doing wrong, as I am worried about breaking a wire or a harness.

Did you use a Torx 30 screwdriver?

.
 
  #3 (permalink)  
Old 06-06-2017 | 08:17 AM
onehundred80's Avatar
Senior Member
Joined: Apr 2006
Posts: 25,429
Likes: 613
From: Ontario
Default Re: I can't seem to get my airbag......

Originally Posted by GraphiteGhost
Did you use a Torx 30 screwdriver?

.
Right on, not a #27 or a #25 only a #30. Anything else and you are in trouble as the smaller sizes ruin the socket edges in the screw head.
Use of a Phillips screwdriver is also a no go. If you used a Phillips then maybe a Torx may still fit, try the 30 first then the next smallest one.
The screws are not that tight and maybe able to be removed using something that jams in the socket of the screw. Someone did just that some years ago and succeeded, maybe they can add the solution. Someone from Murf I think.
 

Last edited by onehundred80; 06-06-2017 at 08:21 AM.
  #4 (permalink)  
Old 06-06-2017 | 11:11 AM
JSK's Avatar
JSK
Senior Member
Joined: Jul 2014
Posts: 1,194
Likes: 118
From: Mesa Arizona
Default Re: I can't seem to get my airbag......

Put a good strong magnet against the shaft of the screwdriver and see if you can pull the screws out.
 
  #5 (permalink)  
Old 06-06-2017 | 11:30 AM
wolf359loki's Avatar
Thread Starter
Joined: Jul 2016
Posts: 17
Likes: 0
From: Edmonton, AB
Smile Re: I can't seem to get my airbag......

Originally Posted by GraphiteGhost
Did you use a Torx 30 screwdriver?

.
Thanks All. I had to make the steering wheel telescope all the way up to get my longest and thinnest T-30 in and break them free. I think the screw driver I started with was just too short and thick and I was hearing the TORX-30 rubbing the top of the screw. I was then able to drop it back, unhook the battery overnight and finish the install this morning. I was changing the turn signal switch cluster. I got a quote from a shop of 800 parts and labor. I was able to get the part on E-Bay for 140ish and 2 hours to make the change. Everything seems to be working so I hope the money I saved won’t result in the steering wheel coming off or a sudden airbag problems, hahahaha.
 
  #6 (permalink)  
Old 06-06-2017 | 04:37 PM
onehundred80's Avatar
Senior Member
Joined: Apr 2006
Posts: 25,429
Likes: 613
From: Ontario
Default Re: I can't seem to get my airbag......

Originally Posted by wolf359loki
Thanks All. I had to make the steering wheel telescope all the way up to get my longest and thinnest T-30 in and break them free. I think the screw driver I started with was just too short and thick and I was hearing the TORX-30 rubbing the top of the screw. I was then able to drop it back, unhook the battery overnight and finish the install this morning. I was changing the turn signal switch cluster. I got a quote from a shop of 800 parts and labor. I was able to get the part on E-Bay for 140ish and 2 hours to make the change. Everything seems to be working so I hope the money I saved won’t result in the steering wheel coming off or a sudden airbag problems, hahahaha.
I'm glad you got it sorted out OK.
 
  #7 (permalink)  
Old 06-07-2017 | 08:06 AM
ala_xfire's Avatar
Senior Member
Joined: Dec 2010
Posts: 12,779
Likes: 162
From: Lineville, AL
Default Re: I can't seem to get my airbag...

My airbag rides in the passenger seat. I have found no way to prevent it from exploding if :
1. I drive too fast.
2. I take a corner too fast.
3. I stop too fast.
4. I follow too close.
5. I get too close to the edge or middle of the road.
6. I play the music too loud.

I found it best to just leave it at home.......
 
  #8 (permalink)  
Old 06-07-2017 | 07:05 PM
onehundred80's Avatar
Senior Member
Joined: Apr 2006
Posts: 25,429
Likes: 613
From: Ontario
Default Re: I can't seem to get my airbag...

Originally Posted by ala_xfire
My airbag rides in the passenger seat. I have found no way to prevent it from exploding if :
1. I drive too fast.
2. I take a corner too fast.
3. I stop too fast.
4. I follow too close.
5. I get too close to the edge or middle of the road.
6. I play the music too loud.

I found it best to just leave it at home.......
That's when the fight started.
 
  #9 (permalink)  
Old 06-07-2017 | 07:12 PM
ala_xfire's Avatar
Senior Member
Joined: Dec 2010
Posts: 12,779
Likes: 162
From: Lineville, AL
Default Re: I can't seem to get my airbag...

Originally Posted by onehundred80
That's when the fight started.
Fight ? There is NEVER a fight. In 41 years of marriage, I have never won a fight, therefore there are no longer any fights.
Repeat after me " "YES DEAR"
 
  #10 (permalink)  
Old 06-08-2017 | 07:14 AM
GraphiteGhost's Avatar
Senior Member
Joined: Jul 2009
Posts: 6,012
Likes: 516
From: Central South Carolina
Default Re: I can't seem to get my airbag...

Originally Posted by ala_xfire
Fight ? There is NEVER a fight. In 41 years of marriage, I have never won a fight, therefore there are no longer any fights.
Repeat after me " "YES DEAR"


Am there, doing that! LMAO!

.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JHM2K
Interior
50
02-10-2012 10:16 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: I can't seem to get my airbag...



All times are GMT -4. The time now is 02:34 PM.