Exterior & Lighting Any questions related to exterior, lighting and styling go in here.

LED hi beam, low beam and fog

Thread Tools
 
  #1 (permalink)  
Old 10-20-2014 | 05:12 PM
keith of bellingham's Avatar
Thread Starter
Joined: Mar 2013
Posts: 4
Likes: 0
From: Bellingham
Default LED hi beam, low beam and fog

Has anyone tried installing LED bulbs for the high and low beam H7 bulbs? What about the 9006 fog lights?
I am thinking of converting all these lights to the 6000K series for better visibility on dark roads.
Also, is the high beam independently adjustable from the low beam? I know on the Mercedes it is.
 
  #2 (permalink)  
Old 10-20-2014 | 07:23 PM
Padgett's Avatar
Senior Member
Joined: Oct 2013
Posts: 2,145
Likes: 36
From: Orlando
Default Re: LED hi beam, low beam and fog

How fast do the LEDs turn on ? Would not like to lose the headlight flashing capability.
 
  #3 (permalink)  
Old 10-20-2014 | 08:23 PM
ala_xfire's Avatar
Senior Member
Joined: Dec 2010
Posts: 12,779
Likes: 162
From: Lineville, AL
Default Re: LED hi beam, low beam and fog

I do not think the H7 aftermarket LED bulbs are quite up to the task yet, give them another year or so.
While there is no delay to full brightness ( mr padgett ), there is just not enough lumens yet.
Best combo at present is HID lows and Halogen Highs. HID's are also OK in the 9006 fogs.
You do not want HID's in the highs because they take too long to come up to full brightness.
 

Last edited by ala_xfire; 10-21-2014 at 04:42 PM.
  #4 (permalink)  
Old 10-21-2014 | 04:38 PM
keith of bellingham's Avatar
Thread Starter
Joined: Mar 2013
Posts: 4
Likes: 0
From: Bellingham
Default Re: LED hi beam, low beam and fog

I tried LED in both fog and low beam lights. I used 6000k lights as I find the bright white shows up the road better at night. The Fog lights work well, however the 1920 lumen low beam do not give enough range for driving on roads without street lights.
I am going to try some 3000 lumen and see if this helps. The LED bulb would not fit into the housing as the hole is to small for the size of the LED bulb
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mike OD
New Member Introductions
8
09-23-2016 08:00 AM
Franc Rauscher
Troubleshooting & Technical Questions & Modifications
14
05-09-2016 01:04 PM
Darryl Camisa
New Member Introductions
12
10-07-2015 08:10 AM
DaveMe
U.K.
2
09-29-2015 09:09 AM
AlbertFattal
Exterior & Lighting
3
09-24-2015 06:03 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 11:37 PM.