eyebrow lights again?
Join Date: Apr 2008
Location: Somersworth, NH
Age: 64
Posts: 1,495
Likes: 0
Received 2 Likes
on
2 Posts
eyebrow lights again?
I got these from superbrights. They have built resistors and diodes to protect against reverse polarity but are they going to set off my light-out idiot light? They dont look to be like the can bus ones
Super Bright LEDs - Miniature Wedge Base Bulbs
I got the one LED wide angle ones
Super Bright LEDs - Miniature Wedge Base Bulbs
I got the one LED wide angle ones
Last edited by green-ghost; 03-09-2011 at 07:32 PM.
Join Date: Oct 2010
Location: Anaheim Hills, CA
Age: 32
Posts: 399
Likes: 0
Received 1 Like
on
1 Post
Re: eyebrow lights again?
Originally Posted by green-ghost
I got these from superbrights. They have built resistors and diodes to protect against reverse polarity but are they going to set off my light-out idiot light? They dont look to be like the can bus ones
Super Bright LEDs - Miniature Wedge Base Bulbs
I got the one LED wide angle ones
Super Bright LEDs - Miniature Wedge Base Bulbs
I got the one LED wide angle ones
If so then...
I have an '05 Base N/A Coupe and replaced my parking light bulbs with the 6 LED 35° Miniature 194 style Wedge Bulbs (In Ultraviolet Light color ) and have had ZERO issues with idiot lights coming on.
That being said...I'm not even sure my car has idiot lights (other than the low fuel light), but you shouldn't have an issue.
Feel free to PM me if you have more questions.
Regards,
Eric
Join Date: Aug 2009
Location: Warner Robins, GA
Age: 64
Posts: 3,459
Likes: 0
Received 9 Likes
on
8 Posts
Re: eyebrow lights again?
Here are the ones that I have on mine. They are a bit pricy at $25 for a pair, but they look great, and no worries about error codes.
https://store.ijdmtoy.com/ProductDet...Free_T10_SKU26
https://store.ijdmtoy.com/ProductDet...Free_T10_SKU26
Join Date: Dec 2006
Location: Murfreesboro, TN
Age: 40
Posts: 6,349
Likes: 0
Received 14 Likes
on
13 Posts
Re: eyebrow lights again?
Originally Posted by bmorgan
Here are the ones that I have on mine. They are a bit pricy at $25 for a pair, but they look great, and no worries about error codes.
https://store.ijdmtoy.com/ProductDet...Free_T10_SKU26
https://store.ijdmtoy.com/ProductDet...Free_T10_SKU26
Join Date: Apr 2008
Location: Somersworth, NH
Age: 64
Posts: 1,495
Likes: 0
Received 2 Likes
on
2 Posts
Re: eyebrow lights again?
Originally Posted by bmorgan
Here are the ones that I have on mine. They are a bit pricy at $25 for a pair, but they look great, and no worries about error codes.
https://store.ijdmtoy.com/ProductDet...Free_T10_SKU26
https://store.ijdmtoy.com/ProductDet...Free_T10_SKU26
If they do throw a code then I'll just pup them in the map lights...only $7 total for them
yes eyebrow lights. Base coupes dont have the lightbulb out in their dash, mines a limited
Join Date: Apr 2008
Location: Somersworth, NH
Age: 64
Posts: 1,495
Likes: 0
Received 2 Likes
on
2 Posts
Join Date: Apr 2008
Location: Somersworth, NH
Age: 64
Posts: 1,495
Likes: 0
Received 2 Likes
on
2 Posts
Re: eyebrow lights again?
2 Car Bulbs CAN-BUS T10 3-LED SMD White Turn/Tail Light - eBay (item 220730194817 end time Mar-26-11 21:45:07 PDT)
I got these just to try, went with 3 smd cause I wanted to make sure they fit.
I got these just to try, went with 3 smd cause I wanted to make sure they fit.
Re: eyebrow lights again?
Originally Posted by green-ghost
I just might join the black tape club
Join Date: Apr 2009
Location: Brampton, Ontario, Canada
Posts: 752
Likes: 0
Received 1 Like
on
1 Post
Re: eyebrow lights again?
I grabbed these on E-bay and they look and work great no error light.
http://cgi.ebay.ca/8smd-Canbus-Error...item3f04078ee6
Sean
http://cgi.ebay.ca/8smd-Canbus-Error...item3f04078ee6
Sean
Re: eyebrow lights again?
Well I got one bulb out and replaced tonight before I lost the sun. Looks great, + no error! The other bulb is like sealed in there. I guess I will try some WD40?
Anyone know of LED fog lights that will match the look? I don't care about light output, HID headlights will cover that. I just want the hyperwhite look.
Anyone know of LED fog lights that will match the look? I don't care about light output, HID headlights will cover that. I just want the hyperwhite look.
Join Date: Apr 2008
Location: Somersworth, NH
Age: 64
Posts: 1,495
Likes: 0
Received 2 Likes
on
2 Posts
Re: eyebrow lights again?
Originally Posted by Sheldon
Well I got one bulb out and replaced tonight before I lost the sun. Looks great, + no error! The other bulb is like sealed in there. I guess I will try some WD40?
Anyone know of LED fog lights that will match the look? I don't care about light output, HID headlights will cover that. I just want the hyperwhite look.
Anyone know of LED fog lights that will match the look? I don't care about light output, HID headlights will cover that. I just want the hyperwhite look.
Try www.Factorykiss.com sure its china and sketchy but their customer service is awsome
Re: eyebrow lights again?
Originally Posted by green-ghost
Sheldon, the fog lights are 9006 bulbs. There are lots of led lights in that application. Ive found that SMDs are superior to old LEDs. SMDs have the little yellow square wafer instead of a bulb and put out intense light.
Try www.Factorykiss.com sure its china and sketchy but their customer service is awsome
Try www.Factorykiss.com sure its china and sketchy but their customer service is awsome
Also I finally got both my eyelids in this morning
Join Date: Apr 2008
Location: Somersworth, NH
Age: 64
Posts: 1,495
Likes: 0
Received 2 Likes
on
2 Posts
Re: eyebrow lights again?
no resistor needed. any can bus type bulb is error free. the link will take you to their canbus bulbs. you will notice a small square thing on the bulb (resistor?) aside from the SMD.
I got their 36mm festoon canbus lights for my license plate light, heres a pic of the difference between stock and SMD
I got their 36mm festoon canbus lights for my license plate light, heres a pic of the difference between stock and SMD
Re: eyebrow lights again?
Originally Posted by green-ghost
no resistor needed. any can bus type bulb is error free. the link will take you to their canbus bulbs. you will notice a small square thing on the bulb (resistor?) aside from the SMD.
I got their 36mm festoon canbus lights for my license plate light, heres a pic of the difference between stock and SMD
I got their 36mm festoon canbus lights for my license plate light, heres a pic of the difference between stock and SMD
Join Date: Apr 2008
Location: Somersworth, NH
Age: 64
Posts: 1,495
Likes: 0
Received 2 Likes
on
2 Posts
Re: eyebrow lights again?
Originally Posted by oledoc2u
As a highly trained law enforcement officer, I appreciate your concern for me being able to read your license plate number....lol
Join Date: Oct 2010
Location: Anaheim Hills, CA
Age: 32
Posts: 399
Likes: 0
Received 1 Like
on
1 Post
Join Date: Apr 2008
Location: Somersworth, NH
Age: 64
Posts: 1,495
Likes: 0
Received 2 Likes
on
2 Posts
Re: eyebrow lights again?
2 Car Bulbs CAN-BUS T10 3-LED SMD White Turn/Tail Light - eBay (item 220730194817 end time Mar-26-11 21:45:07 PDT)
3 smd, t10 canbus for 9.99 free shipping
ended up with these from factorykiss..very good quality and got them in 2weeks (china) one smd points straight ahead and the other 2 shine upside and downside filling the eyebrow area with a soft white very light blue light
AND YES THOSE SOCKETS WERE A PITA TO GET OUT. GLAD I HAVE LITTLE HANDS TO GET SPOTS LIKE THAT...UGH
Pooly
3 smd, t10 canbus for 9.99 free shipping
ended up with these from factorykiss..very good quality and got them in 2weeks (china) one smd points straight ahead and the other 2 shine upside and downside filling the eyebrow area with a soft white very light blue light
AND YES THOSE SOCKETS WERE A PITA TO GET OUT. GLAD I HAVE LITTLE HANDS TO GET SPOTS LIKE THAT...UGH
Pooly
Join Date: Oct 2010
Location: Anaheim Hills, CA
Age: 32
Posts: 399
Likes: 0
Received 1 Like
on
1 Post
Re: eyebrow lights again?
Originally Posted by green-ghost
AND YES THOSE SOCKETS WERE A PITA TO GET OUT. GLAD I HAVE LITTLE HANDS TO GET SPOTS LIKE THAT...UGH