Stainless side accent came off
Re: Stainless side accent came off
https://www.crossfireforum.org/forum...t=31445&page=2
Do you mean the ones pictured in post #37 on this link?
If so click on the thumbnails, the pins hold them on.
Do you mean the ones pictured in post #37 on this link?
If so click on the thumbnails, the pins hold them on.
Re: Stainless side accent came off
As long as were on this subject. I tried to put an emblem on before I knew the trick and got it on crooked. I used the old heat gun and dental floss to get it off. Since it ruined the adhesive on the double sides tape. (Avery Dennison) I have to either re-tape it or use goo. I'd rather use goo and I can think of a lot of them that will work but I'm not sure which ones will allow me to remove them without removing the paint if they get crappy looking or I decide I don't like them. I plan on E-mailing A.D. but this seemed like a good opportunity to ask all of you.
Pretty long winded for a simple question. Please indulge me. MM
Pretty long winded for a simple question. Please indulge me. MM
Re: Stainless side accent came off
Code:
zy123456 One of the side accents on my car came off and I'm not sure what would be a good way to put it back on. Would a strong double sided tape work or would i need something stronger like an epoxy? Any suggestions?
Are you talking about stainless or chrome trim on the side vents on the fenders? If so I believe that they are super glued on over the original plastic side strakes. If that is what you are talking about you will have to use super glue or epoxy; i.e. no room for double sided tape...
Good luck and let us know how you do...
Respectfully,
Paul (MisterTaz)
Thread
Thread Starter
Forum
Replies
Last Post
RED DOG
Parts/Accessories for sale - Archive
44
10-27-2020 09:00 PM
2005 Ragtop
Wheels, Brakes, Tires and Suspension
7
10-03-2015 03:01 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)