Son of POP or POP part 2.
Re: Son of POP or POP part 2.
I didn't remove it from the intercooler and it's plugged in. The car started fine, started missing P0304 cyl 4, cleared the code restarted and all seems fine except ... I'm still hearing a loud hissing that started when I emptied the catch can recently. So tomorrow I'll go get gas and pull all the catch can hoses to see what I can find. I used a great deal of care, took my time and have high confidence in my work so if I still have a problem I believe it's something I didn't work on or check.
Les
Les
Re: Son of POP or POP part 2.
I didn't remove it from the intercooler and it's plugged in. The car started fine, started missing P0304 cyl 4, cleared the code restarted and all seems fine except ... I'm still hearing a loud hissing that started when I emptied the catch can recently. So tomorrow I'll go get gas and pull all the catch can hoses to see what I can find. I used a great deal of care, took my time and have high confidence in my work so if I still have a problem I believe it's something I didn't work on or check.
Les
Les
Re: Son of POP or POP part 2.
To be honest, I wanted to take it apart. I do most of my own work but I had the wavetrak done ..... it whines. I had the meth installed, it freaked. I had the new intercooler installed, I suspected it was leaking for a while and I couldn't tell one way or the other when it came apart. Now I know for a fact how it was sealed, cleaned torqued etc. After clearing the code and restarting I only drove around the basement of my building until the engine reached normal temperature. The AFR's were steady, a positive change, and the idle smoother. No O2 sensor code. I'm hoping for the best.
Les
Les
Re: Son of POP or POP part 2.
Passed the first test today. Grandpa drive to the supermarket first. Checked out fine. Then a quick trip to a short safe proving ground for a pull to 60 or so. Passed with flying colors. So far the cars idling better, AFR's are more stable at idle and cruise, IAT's are lower, the secondary air injection isn't freaking out. I still got a P0161 at startup. I'll deal with that one later this week ie switch the cables from side to side to see if the code moves. Fixed? Yes! Relieved? Yes! Improved? Time will tell.
Les
Les
Thread
Thread Starter
Forum
Replies
Last Post
maxcichon
Wheels, Brakes, Tires and Suspension
13
05-14-2019 07:30 PM
axnguyen
Cars For Sale - Archive
1
07-21-2015 11:41 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)