Valve cover leak...
Joined: Sep 2020
Posts: 4
Likes: 0
From: Alabama
Re: Valve cover leak...
Great information on the valve cover maintenance. I am in the process of fixing a leak on my valve covers. I have some damage to one of the hoses on the valve cover. Are there any replacement hose sets for the valve covers. the hose seem to be brittle. Anyone know part numbers for the hoses?
Thanks
Thanks
Senior Member
Joined: Nov 2008
Posts: 8,244
Likes: 645
From: Upstate SC
Re: Valve cover leak...
These ?
CLICK
CLICK
Great information on the valve cover maintenance. I am in the process of fixing a leak on my valve covers. I have some damage to one of the hoses on the valve cover. Are there any replacement hose sets for the valve covers. the hose seem to be brittle. Anyone know part numbers for the hoses?
Thanks
Thanks
Senior Member
Joined: Jan 2007
Posts: 2,663
Likes: 99
From: Michigan
Re: Valve cover leak...
we have a set in stock and can ship today for you
NeedsWings Performance Products. Part Load Crankcase Ventilation Hose Assembly m112
NeedsWings Performance Products. Part Load Crankcase Ventilation Hose Assembly m112
The following 2 users liked this post by NeedsWings:
kowaltoboggan (01-17-2022),
M60A3Driver (06-27-2023)
Joined: Sep 2020
Posts: 4
Likes: 0
From: Alabama
Re: Valve cover leak...
Ok, I want to replace all the hose associated with this valve cover maintenance. Thanks for everyone's help. 2004 XF 45k miles, subs refurbished, TPM light wire removed, but have after market unit in operation for TPM, new radio for USB support/phone. loving this car and this forum! Thanks
Joined: Jun 2021
Posts: 13
Likes: 0
From: SW Michigan
Re: Valve cover leak...
Great post! I love this forum, 12 years after OP and still helping an X-fire brother out!
The service manual I downloaded from this forum (again, I love this forum) says use a 1mm bead of sealant. I put some RTV in a 20ml syringe to make a very fine bead. When finished there was no silicone oozing out from the seam; time will tell if this method is successful.
The service manual I downloaded from this forum (again, I love this forum) says use a 1mm bead of sealant. I put some RTV in a 20ml syringe to make a very fine bead. When finished there was no silicone oozing out from the seam; time will tell if this method is successful.
Last edited by KowalaGT; 07-19-2021 at 12:22 AM.
Joined: Aug 2021
Posts: 47
Likes: 1
From: Pretoria, South Africa
Re: Valve cover leak...
we have a set in stock and can ship today for you
NeedsWings Performance Products. Part Load Crankcase Ventilation Hose Assembly m112
NeedsWings Performance Products. Part Load Crankcase Ventilation Hose Assembly m112
Quick question for you on this set of hoses. Does the kit contain all three hoses that attach to the breathers? The right side has one breather hose coming from it. The left valve cover breather has two -- one that is the same diameter as the right side breather; the second comes off the back of the left valve cover breather that is larger than the other two.
Many thanks, John
ps-- What a great resource it is to have NeedsWings supplying these parts. Without you guys, it is much more difficult to get the correct items for our XFs. Happy to support you.
Senior Member
Joined: Jan 2007
Posts: 2,663
Likes: 99
From: Michigan
Re: Valve cover leak...
that assembly is the smaller diameter hoses / fittings from both valve covers to the throttle body. the larger diameter hose from the driver side valve cover to the MAF housing woudl be this one
https://www.needswings.com/full-load...tion-hose-m112
https://www.needswings.com/full-load...tion-hose-m112
Joined: Nov 2009
Posts: 134
Likes: 14
From: Overland Park, KS
Re: Valve cover leak...
looking good
1. you can remove the oil fill cap extension neck, use a flat screw driver and pry up on it from the back side and twist off counter clockwise. you can then screw the oil cap directly onto the valve cover and eliminate a potential leak point.
2. I would like to see the hose clamp on the hose connecting the drivers valve cover to the CAI's MAF housing (I sent 2 of them with the kit).
3. you can remove the 4 rubber mushroom grommets on the valve covers as you no longer need them with the CAI
4. your missing the passenger side wiper arm nut cap
5. a little bit of brake cleaner and a plastic brush would go a long way on the top of that intake manifold to bring back its glory.
1. you can remove the oil fill cap extension neck, use a flat screw driver and pry up on it from the back side and twist off counter clockwise. you can then screw the oil cap directly onto the valve cover and eliminate a potential leak point.
2. I would like to see the hose clamp on the hose connecting the drivers valve cover to the CAI's MAF housing (I sent 2 of them with the kit).
3. you can remove the 4 rubber mushroom grommets on the valve covers as you no longer need them with the CAI
4. your missing the passenger side wiper arm nut cap
5. a little bit of brake cleaner and a plastic brush would go a long way on the top of that intake manifold to bring back its glory.
It looks like I have an oil leak at the base of the oil fill cap extension neck (No. 1 above). Is there a gasket or o-ring there that needs to be replaced? It sounds like it’s an easy fix without having to remove the valve cover.
Senior Member
Joined: Jan 2007
Posts: 2,663
Likes: 99
From: Michigan
Forum Regular
Joined: Nov 2014
Posts: 613
Likes: 46
From: Oklahoma City
Re: Valve cover leak...
Senior Member
Joined: Jan 2007
Posts: 2,663
Likes: 99
From: Michigan
Re: Valve cover leak...
5mm and 4mm
Senior Member
Joined: Apr 2006
Posts: 2,399
Likes: 138
From: West Chester, PA.
Thread
Thread Starter
Forum
Replies
Last Post
BisB
Troubleshooting & Technical Questions & Modifications
24
03-07-2018 02:41 PM
oojacoboo
Engine, Exhaust, Transmission and Differential
6
12-14-2010 03:24 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)