Need Help...
Re: Need Help...
Originally Posted by 70GT6
Do you have the original?
If it is just a spacer try a repair on it- maybe a sandable epoxy
The o-ring is actuallly what seals it. How exactly did a 1/4" thick spacer "rip"?
If it is just a spacer try a repair on it- maybe a sandable epoxy
The o-ring is actuallly what seals it. How exactly did a 1/4" thick spacer "rip"?
once i remove it and look at it myself, i might be able to come up with a fix.
The dealer says that having the aftermarket intake installed on the car and not having it bolted down caused the intake to twist and rip the gasket. this is the 5th intake i have had on the car-stock one with K&N filters, BDJ, a highly complicated temp PVC intake (used while i was pieceing together a temp Spectre intake), a spectre intake and lastly the JMB performance intake. JMB is the only intake that actually has a tab welded to bolt it down (besides the stock one) The rest of the intakes basically just sit there. when the hood is closed, there is not enough room for the intake to twist like the dealer says.
I am not sure if just installing and removing so many intakes wore the piece out or if the nitrous deteriated the gasket or made it weak or what...either way, i am not paying 7 large for a simple rubber gasket.
The roush mustang is looking better and better...at least i know i can get parts for it
Last edited by MUTT; 09-03-2008 at 05:18 PM.
Re: Need Help...
Originally Posted by mrphotoman
could you just buy one of those generic gasket kits and make one? or maybe just use some gasket maker to seal it up? That is crazy you have to order all that just for something so simple.
Re: Need Help...
Originally Posted by MUTT
i am removing the gasket tomorrow to see what i can actually do to fix it. It has been at the dealer for 10 days so i havent had a chance to really look at it myself.
at worst, just take it to a machine shop and have them make you one. i bet you can get it made for under $50.
Re: Need Help...
Originally Posted by mrphotoman
wow i bet that is really frustraiting, good luck and let us know what you find out.
at worst, just take it to a machine shop and have them make you one. i bet you can get it made for under $50.
at worst, just take it to a machine shop and have them make you one. i bet you can get it made for under $50.
<--- Huge Horsepower
Re: Need Help...
Try calling these folks tomorrow.
http://www.mercedesdismantlers.com/
http://www.mercedesnewparts.com/
http://www.psesuperchargers.com/
Make sure to send them a picture and tell then not to bother of it doesn't have the black spacer/gasket
http://www.mercedesdismantlers.com/
http://www.mercedesnewparts.com/
http://www.psesuperchargers.com/
Make sure to send them a picture and tell then not to bother of it doesn't have the black spacer/gasket
Last edited by BrianBrave; 09-03-2008 at 05:58 PM.
Re: Need Help...
Originally Posted by BrianBrave
Try calling these folks tomorrow.
http://www.mercedesdismantlers.com/
http://www.mercedesnewparts.com/
http://www.psesuperchargers.com/
Make sure to send them a picture and tell then not to bother of it doesn't have the black spacer/gasket
http://www.mercedesdismantlers.com/
http://www.mercedesnewparts.com/
http://www.psesuperchargers.com/
Make sure to send them a picture and tell then not to bother of it doesn't have the black spacer/gasket
Re: Need Help...
Well went to pick up the car today...when i got there they informed me that they finally found the correct part...they had another SRT on the lot and decided to remove the gasket so they could get good pics to send up to detroit. Once they removed the gasket, the part number is on the gasket itself on the bottom side. part ordered and will be here monday. thanks for all of the help and info
Re: Need Help...
what dumb@ss people did they hire? I still follow my service mgr, whereever he goes, I go...in fact, as soon as the car is clean again...rainin today,, I am taking it down so his new mechanics can see the car...he just went to another dealership, so I have to get the know his new mechanics all over again...I take doughnuts when I go...they usually love me when I leave...got to get to know the people you may have to work with...we talk shop...hang out for awhile...look in the parking lot when driving up, sometimes there are old muscle cars, or beefed up jeeps...find something in common to talk about...but in the end, the service mgr will make the call, not the mechanic...so treat him or her with respect even though you want to kick someone...
<--- Huge Horsepower
Re: Need Help...
Originally Posted by MUTT
Well went to pick up the car today...when i got there they informed me that they finally found the correct part...they had another SRT on the lot and decided to remove the gasket so they could get good pics to send up to detroit. Once they removed the gasket, the part number is on the gasket itself on the bottom side. part ordered and will be here monday. thanks for all of the help and info
Thread
Thread Starter
Forum
Replies
Last Post
Allin360
WTB - Items/Parts Wanted to Buy - Archive
2
04-14-2015 07:52 PM
Jac2858
Troubleshooting & Technical Questions & Modifications
4
01-17-2015 12:48 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)