NeedsWings na and srt6 CAI group buy
Re: NeedsWings na and srt6 CAI group buy
Originally Posted by RPM
Plan on putting my CAI on this weekend.
I'll let you know how many beers it takes me. But I'll also let you know how long it takes me.
I like my beer. Ask Rob w/NeedsWings (great guy btw) .
I'll let you know how many beers it takes me. But I'll also let you know how long it takes me.
I like my beer. Ask Rob w/NeedsWings (great guy btw) .
My install was a 3 beer job - a home made brew - an Irish stout style (very good if I say so my self - about 5.5% ABV)....problem was I got done and had forgotten to re-mount the re-located horn... - 2 mins later, all was well. I took my time - probably and 90 mins start to stop w/2 cell phone interruptions and 2 runs to the fridge.
Re: NeedsWings na and srt6 CAI group buy
i thought when this group buy started that there were around 20 intakes ready to ship? will some of these ship in the next day or so? my track day is saturday morning next week so i will need mine by wednesday so i will have time to get it on since i work long days and i leave for the track at 7am next saturday. i only get to go to the track once about every 2 months since it is 3 hours away.
Re: NeedsWings na and srt6 CAI group buy
From what I gathered there were 20 already bent. Then they needed to be powderscoated. I guess the powdercoating guy didn't get back to him by the time the remaining ones were bent so Rob decided to do the powdercoating all at once and ship all at once.
Re: NeedsWings na and srt6 CAI group buy
i had 20 intake tubes already bent before we started the group buy, i then waited until i saw the first 20 orders to determine what split to make them into (srt6 or na), those then went to powdercoat, i had another 40 tubes bent and then split those into srt6 and na's accordingly, those i also brought to the powdercoater, they had not started coating the original 20 at that time so now they have all 60 there for the powdercoating.
everything else is here, all the filters/silicone/clamps/hoses/brackets/ect..
as soon as i get the call saying the powdercoating is done ill go pick them up and begin boxing/shipping
everything else is here, all the filters/silicone/clamps/hoses/brackets/ect..
as soon as i get the call saying the powdercoating is done ill go pick them up and begin boxing/shipping
Re: NeedsWings na and srt6 CAI group buy
Originally Posted by NeedsWings
i had 20 intake tubes already bent before we started the group buy, i then waited until i saw the first 20 orders to determine what split to make them into (srt6 or na), those then went to powdercoat, i had another 40 tubes bent and then split those into srt6 and na's accordingly, those i also brought to the powdercoater, they had not started coating the original 20 at that time so now they have all 60 there for the powdercoating.
everything else is here, all the filters/silicone/clamps/hoses/brackets/ect..
as soon as i get the call saying the powdercoating is done ill go pick them up and begin boxing/shipping
everything else is here, all the filters/silicone/clamps/hoses/brackets/ect..
as soon as i get the call saying the powdercoating is done ill go pick them up and begin boxing/shipping
Re: NeedsWings na and srt6 CAI group buy
Originally Posted by AtomHeart
Did the powdercoater give you an estimate on when they might get to these, and how long it will take them to get through 60 of them?
we cut all the rad passthru and valve cover breather hoses today so all we have left to do its burn the instructions onto 40 cdr's (which i'll start in a few miutes). you guys should see how much packing peanuts we have waiting for these, i bet we could fill a small swimming pool
Re: NeedsWings na and srt6 CAI group buy
Originally Posted by NeedsWings
this week, they are ~ a 300 employee company that does mostly govt contracts. its not some dude in a pole barn that i can keep calling and hounding. they should all be fiished at the same time, they have huge walk in ovens so they will most likely be baked all togather.
we cut all the rad passthru and valve cover breather hoses today so all we have left to do its burn the instructions onto 40 cdr's (which i'll start in a few miutes). you guys should see how much packing peanuts we have waiting for these, i bet we could fill a small swimming pool
we cut all the rad passthru and valve cover breather hoses today so all we have left to do its burn the instructions onto 40 cdr's (which i'll start in a few miutes). you guys should see how much packing peanuts we have waiting for these, i bet we could fill a small swimming pool
Last edited by bflinn; 04-21-2008 at 02:40 PM.
Re: NeedsWings na and srt6 CAI group buy
Originally Posted by NeedsWings
we cut all the rad passthru and valve cover breather hoses today so all we have left to do its burn the instructions onto 40 cdr's (which i'll start in a few miutes). you guys should see how much packing peanuts we have waiting for these, i bet we could fill a small swimming pool
Senior Member
Join Date: Sep 2006
Location: N.E. Wisconsin
Age: 70
Posts: 1,984
Likes: 0
Received 0 Likes
on
0 Posts
Re: NeedsWings na and srt6 CAI group buy
Originally Posted by tylerxfire
needswings, i am installing my nitrous kit tomorrow and it will be sprayed into the intake before the throttle body, your intake will not change anything in that area right?, it is just after mass airflow sensor correct.
Re: NeedsWings na and srt6 CAI group buy
Hey Rob,
Put me down for the group buy for your CAI.
I have a 2004 Crossfire .
Payment has been sent. sales@needswings.com
Put me down for the group buy for your CAI.
I have a 2004 Crossfire .
Payment has been sent. sales@needswings.com
Originally Posted by NeedsWings
lets do 2 weeks
group buy = we get a bunch of people together, we all get payment in, they all ship out together in one group.
we should have the first 20 ready most likely early next week, the order they ship will be determined by the order they are paid for
Mr. F srt6 PAID
AtomHeart srt6 PAID
arhshelby srt6 PAID
mrphotoman srt6 PAID
PowerOn srt6 PAID
DAMSRT-6 srt6 PAID
CdnX-fireOwner srt6 PAID
Samstin srt6 PAID
McCombcliff srt6 PAID
Thumper SRT6 srt6 PAID
parawxman srt6 PAID
Haywood srt6 PAID
sixshooter srt6 PAID
kurts srt6 PAID
BlackJaxSRT srt6 PAID
Dave McGuire srt6 PAID
Spensley na PAID
intenseblu na PAID
doublediz na PAID
tylerxfire na PAID
hoverhog na PAID
SRT6_crossfire srt6 PAID
GatorLCA srt6 PAID
tom2112 srt6 PAID
dbg55 na PAID
BuffNSoFly srt6 PAID
kikofranky srt6 PAID
Scotto97 srt6 PAID
oledoc2u srt6 PAID
PAULSXF na PAID
HyprLtH20 na PAID - unpowdercoated - shipped
coony3737 srt6 PAID
Z28toXFire na PAID
psuperti na PAID
cameron na R.H.D. PAID
DerEifelFahrer srt6 PAID
tolas007 srt6 PAID
Jeff Cobb srt6 PAID
ruud na PAID
srt6shadow srt6 PAID
Paulius srt6 PAID
VALKRYDERGUY na PAID
slow4dr srt6
jonnyangel04 srt6
Csaqlain srt6
group buy = we get a bunch of people together, we all get payment in, they all ship out together in one group.
we should have the first 20 ready most likely early next week, the order they ship will be determined by the order they are paid for
Mr. F srt6 PAID
AtomHeart srt6 PAID
arhshelby srt6 PAID
mrphotoman srt6 PAID
PowerOn srt6 PAID
DAMSRT-6 srt6 PAID
CdnX-fireOwner srt6 PAID
Samstin srt6 PAID
McCombcliff srt6 PAID
Thumper SRT6 srt6 PAID
parawxman srt6 PAID
Haywood srt6 PAID
sixshooter srt6 PAID
kurts srt6 PAID
BlackJaxSRT srt6 PAID
Dave McGuire srt6 PAID
Spensley na PAID
intenseblu na PAID
doublediz na PAID
tylerxfire na PAID
hoverhog na PAID
SRT6_crossfire srt6 PAID
GatorLCA srt6 PAID
tom2112 srt6 PAID
dbg55 na PAID
BuffNSoFly srt6 PAID
kikofranky srt6 PAID
Scotto97 srt6 PAID
oledoc2u srt6 PAID
PAULSXF na PAID
HyprLtH20 na PAID - unpowdercoated - shipped
coony3737 srt6 PAID
Z28toXFire na PAID
psuperti na PAID
cameron na R.H.D. PAID
DerEifelFahrer srt6 PAID
tolas007 srt6 PAID
Jeff Cobb srt6 PAID
ruud na PAID
srt6shadow srt6 PAID
Paulius srt6 PAID
VALKRYDERGUY na PAID
slow4dr srt6
jonnyangel04 srt6
Csaqlain srt6
Last edited by Valk; 04-22-2008 at 08:57 PM.
Re: NeedsWings na and srt6 CAI group buy
hmm......... really and what will that cost me and where exactly would you weld it in, it has to be after mass air flow sensor and before the throttle body optimum is 6-18" but i dont thing i am gonna get 6 inches away. i plan on putting the nozzle right on the bend of that tube and spray directly toward the motor so that will still be in the rubber elbow correct.