Want more boost - Machine your stock pulley
Re: Want more boost - Machine your stock pulley
Originally Posted by tom2112
Sorry, I can't remember the minimum diameter that Eurocharged figured out...
and I can't find the thread where it was heavily discussed either. Hmm...
and I can't find the thread where it was heavily discussed either. Hmm...
Re: Want more boost - Machine your stock pulley
Originally Posted by SparkieSRT6
Tom, is this the thread you were looking for? https://www.crossfireforum.org/forum...ification.html
Maybe I picked up the wrong bearing size from somewhere.
Last edited by onehundred80; 03-10-2012 at 09:11 AM.
Re: Want more boost - Machine your stock pulley
Originally Posted by SparkieSRT6
Tom, is this the thread you were looking for? https://www.crossfireforum.org/forum...ification.html
Re: Want more boost - Machine your stock pulley
I'm still wrestling with the decision to either have my spare pulley safely machined to 68 or 69mm or go slightly larger so that I can keep the option of adding a 178 crank pulley later on. Definately don't want to have to change fuel/pump/injectors/rail etc.?
Re: Want more boost - Machine your stock pulley
Originally Posted by SparkieSRT6
I'm still wrestling with the decision to either have my spare pulley safely machined to 68 or 69mm or go slightly larger so that I can keep the option of adding a 178 crank pulley later on. Definately don't want to have to change fuel/pump/injectors/rail etc.?
last week at the track he saw 25 psi boost and was still running pig rich!
Thread
Thread Starter
Forum
Replies
Last Post
usprb1976
TSBs and How-To Articles
5
04-04-2024 04:57 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)