Crossfire SRT6 A place to discuss SRT-6 specific topics.

Balls Deep

Thread Tools
 
  #161 (permalink)  
Old 06-16-2011 | 09:53 PM
dinasrt's Avatar
Senior Member
Joined: Apr 2010
Posts: 2,404
Likes: 8
From: Mendocino, CA
Default Re: ***** Deep

Originally Posted by tunaglove
Gor Gor big!!
That is one Big Daddy Filter!! You're flowing close to a dual now maybe. Tuna.... forging new trails... where no man has gone before.
 
  #162 (permalink)  
Old 06-17-2011 | 12:22 AM
tri_zombie's Avatar
Joined: Aug 2007
Posts: 182
Likes: 0
From: New Orleans
Default Re: ***** Deep

Originally Posted by NeedsWings
wow, there is a better way, deflate both the race tires and inflate them at the track. they should both fit in the hatch. i do it with ours. basically stand the wheel up, sit on it, pull out the valve cover. when all the air is out and its ovaled then put the valve core back in. you will have 2 ovalled shaped wheels that can fit in the back and the hatch shuts. stick the jack and tool box to the side (still in the trunk), we even fit the helmets too!

Hey Rob If you can figure out a way to do that with a roadster I'll make you my most bestest Friend!!!
 
  #163 (permalink)  
Old 07-02-2011 | 07:03 PM
tunaglove's Avatar
Thread Starter
|
Senior Member
Joined: Mar 2010
Posts: 1,413
Likes: 5
From: White Bear, MN
Default Re: ***** Deep

trying to get lower IATs. I don't think I'm getting enough airflow, even at highway speeds. SPAL 6.5" pusher fans, these babies rip...
 
Attached Images
File Type: jpg
DSC01152.JPG (150.5 KB, 60 views)
File Type: jpg
DSC01153.JPG (151.6 KB, 52 views)
  #164 (permalink)  
Old 07-02-2011 | 07:07 PM
velociabstract's Avatar
Senior Member
Joined: Jul 2008
Posts: 4,521
Likes: 22
From: Puerto Rico
Default Re: ***** Deep

What kind of I/C pump do you have? How high are your IAT's at the top of 3rd? I've gotta know.

Les
 
  #165 (permalink)  
Old 07-02-2011 | 07:08 PM
ZAHANMA's Avatar
Senior Member
Joined: Mar 2008
Posts: 4,535
Likes: 2
From: Houston in my blood, and under my tires...
Default Re: ***** Deep

Originally Posted by tri_zombie
Hey Rob If you can figure out a way to do that with a roadster I'll make you my most bestest Friend!!!

Colin, man haven't seen you on here in forever. Hope you are doing well...


...you should just lay a towel down on the front seat and put both tires up there. I have had to do that before when transporting more than two tires.
 
  #166 (permalink)  
Old 07-02-2011 | 07:13 PM
MikeR's Avatar
Senior Member
Joined: Jan 2008
Posts: 5,180
Likes: 8
From: North Plains, OR
Default Re: ***** Deep

Originally Posted by tunaglove
trying to get lower IATs. I don't think I'm getting enough airflow, even at highway speeds. SPAL 6.5" pusher fans, these babies rip...

tuna, let us know how that works for you.... I recall Woody trying several small fans on a LET HE and it didnt pan out... hope yours work for you....

What were your IAT's without them? With them?
 
  #167 (permalink)  
Old 07-02-2011 | 07:17 PM
tunaglove's Avatar
Thread Starter
|
Senior Member
Joined: Mar 2010
Posts: 1,413
Likes: 5
From: White Bear, MN
Default Re: ***** Deep

Like 130 to 140 Les, but now temps are warmer outside and my average temp while cruizing is always 30 above outside temps. I don't get a lot of sustained high rpm driving like when you race however.
 
  #168 (permalink)  
Old 07-02-2011 | 07:44 PM
velociabstract's Avatar
Senior Member
Joined: Jul 2008
Posts: 4,521
Likes: 22
From: Puerto Rico
Default Re: ***** Deep

My IAT's run 20º over ambient but my H/E holds a gallon. It's almost always around 90º here so my IAT's run about 110º in the city. I'm still on the stock pump and sometimes think I should change it for more flow.

Les
 
  #169 (permalink)  
Old 07-04-2011 | 10:20 AM
tunaglove's Avatar
Thread Starter
|
Senior Member
Joined: Mar 2010
Posts: 1,413
Likes: 5
From: White Bear, MN
Default Re: ***** Deep

Didn't really make a difference
I can cool down my IAT real fast after parking, getting rid of the heat soak.
Would be good for waiting in line to drag race (Wed. night!) but that's about it. My IATs are always 25-30F above ambient. These fans are VERY loud!! Oh well, I only spent about $120 on the whole idea.
 
  #170 (permalink)  
Old 07-04-2011 | 10:38 AM
MikeR's Avatar
Senior Member
Joined: Jan 2008
Posts: 5,180
Likes: 8
From: North Plains, OR
Default Re: ***** Deep

That's too bad... Good luck on Wed!
 
  #171 (permalink)  
Old 07-04-2011 | 10:49 AM
32krazy!'s Avatar
Senior Member
Joined: Apr 2009
Posts: 5,349
Likes: 4
From: murfreesboro,tn
Default Re: ***** Deep

with my supercooler i run 90* below engine temp consistently and then it spikes on wot run then back down very quickly
 
  #172 (permalink)  
Old 07-04-2011 | 11:28 AM
tunaglove's Avatar
Thread Starter
|
Senior Member
Joined: Mar 2010
Posts: 1,413
Likes: 5
From: White Bear, MN
Default Re: ***** Deep

Originally Posted by 32krazy!
with my supercooler i run 90* below engine temp consistently and then it spikes on wot run then back down very quickly
Yep, supercooler is better. But my IATs are pretty close, 90 below 200F coolant temps would be right where I'm at on warmer 80F days.
 

Last edited by tunaglove; 07-04-2011 at 11:30 AM.
  #173 (permalink)  
Old 07-04-2011 | 11:33 AM
tunaglove's Avatar
Thread Starter
|
Senior Member
Joined: Mar 2010
Posts: 1,413
Likes: 5
From: White Bear, MN
Default Re: ***** Deep

Originally Posted by MikeR
That's too bad... Good luck on Wed!
Drag racing is the one time where I think the fans WILL help, waiting to race. In heavy traffic too.
 
  #174 (permalink)  
Old 07-05-2011 | 06:19 PM
tunaglove's Avatar
Thread Starter
|
Senior Member
Joined: Mar 2010
Posts: 1,413
Likes: 5
From: White Bear, MN
Default Re: ***** Deep

:d :d :d :d :d :d
 
Attached Images
File Type: jpg
DSC01155.JPG (144.7 KB, 63 views)
File Type: jpg
DSC01156.JPG (147.3 KB, 58 views)
File Type: jpg
DSC01157.JPG (140.4 KB, 61 views)

Last edited by tunaglove; 07-06-2011 at 10:44 PM.
  #175 (permalink)  
Old 07-21-2011 | 09:43 PM
tunaglove's Avatar
Thread Starter
|
Senior Member
Joined: Mar 2010
Posts: 1,413
Likes: 5
From: White Bear, MN
Default Re: ***** Deep

Bleed the Freak.
 
Attached Images
File Type: jpg
DSC01160.JPG (155.9 KB, 52 views)
File Type: jpg
DSC01161.JPG (155.8 KB, 41 views)
File Type: jpg
DSC01163.JPG (151.8 KB, 515 views)
  #176 (permalink)  
Old 03-18-2012 | 05:09 PM
tunaglove's Avatar
Thread Starter
|
Senior Member
Joined: Mar 2010
Posts: 1,413
Likes: 5
From: White Bear, MN
Default Re: ***** Deep

304 injectors.

I'm trying these phenolics, looks like they fit.

Also new "used" SC guts.

160 degreeF. thermostat I made.
 
  #177 (permalink)  
Old 03-18-2012 | 05:17 PM
tunaglove's Avatar
Thread Starter
|
Senior Member
Joined: Mar 2010
Posts: 1,413
Likes: 5
From: White Bear, MN
Default Re: ***** Deep

whoops, here's the pics....
 
Attached Images
File Type: jpg
march15 003.jpg (2.07 MB, 42 views)
  #178 (permalink)  
Old 03-18-2012 | 05:19 PM
tunaglove's Avatar
Thread Starter
|
Senior Member
Joined: Mar 2010
Posts: 1,413
Likes: 5
From: White Bear, MN
Default Re: ***** Deep

Having trouble with the pics..
 
Attached Images
File Type: jpg
march15 001.jpg (2.36 MB, 43 views)
File Type: jpg
march15 007.jpg (2.31 MB, 50 views)
  #179 (permalink)  
Old 03-18-2012 | 06:46 PM
tunaglove's Avatar
Thread Starter
|
Senior Member
Joined: Mar 2010
Posts: 1,413
Likes: 5
From: White Bear, MN
Default Re: ***** Deep

Nasty!! Yes I have a catch can.
 
Attached Images
File Type: jpg
march15 004.jpg (2.13 MB, 54 views)
File Type: jpg
march15 005.jpg (1.91 MB, 46 views)
File Type: jpg
march15 006.jpg (2.28 MB, 40 views)
  #180 (permalink)  
Old 03-19-2012 | 03:36 AM
dinasrt's Avatar
Senior Member
Joined: Apr 2010
Posts: 2,404
Likes: 8
From: Mendocino, CA
Default Re: ***** Deep

Originally Posted by tunaglove
304 injectors.

I'm trying these phenolics, looks like they fit.

Also new "used" SC guts.

160 degreeF. thermostat I made.
Hey Chris, Where the heck did you get those phenolics? Also, I thought the general consensus for a t-stat mod was 180deg. , the early attempts with lower temp. t-stat allegedly resulted in CEL I think.
And finally, I've never seen the SC rotors/screws before; what is the pinkish color it has? Is that the coating we've heard about that Methanol is purported to eat up? BTW, thanks for your advice on my reservoir tank mount, I finally installed it today.
 


Quick Reply: Balls Deep



All times are GMT -4. The time now is 01:30 AM.