Pulley Saver Kit
Re: Pulley Saver Kit
Originally Posted by Bubba89
I'm doing the same thing Tighed is to remove my belt and it works like a charm. I found that positioning the wrench so your pushing across to release the belt helps it from not loosening up, if you push down it tends to loosen every time. I used it to install the Tighed belt wrap kit coupled with my smaller supercharger pulley and 178 set up and it worked quite well so it should be able to work fine with the 185 install also.
Brandon
Brandon
Re: Pulley Saver Kit
Since it was mentioned here, here is more info on the tensioner.
Available from Autozone for $122 or so shipped to you.
If you are looking for other sources here's a few part numbers...
ACDelco: 38174
Dayco: 305335, 89335, 89335FN
Gates: 38174
Goodyear: 49262
Mercedes Benz: 112 200 03 70, 112 200 09 70, 112 300 03 70
Available from Autozone for $122 or so shipped to you.
If you are looking for other sources here's a few part numbers...
ACDelco: 38174
Dayco: 305335, 89335, 89335FN
Gates: 38174
Goodyear: 49262
Mercedes Benz: 112 200 03 70, 112 200 09 70, 112 300 03 70
Re: Pulley Saver Kit
Originally Posted by tighed1
Since it was mentioned here, here is more info on the tensioner.
Available from Autozone for $122 or so shipped to you.
If you are looking for other sources here's a few part numbers...
ACDelco: 38174
Dayco: 305335, 89335, 89335FN
Gates: 38174
Goodyear: 49262
Mercedes Benz: 112 200 03 70, 112 200 09 70, 112 300 03 70
Available from Autozone for $122 or so shipped to you.
If you are looking for other sources here's a few part numbers...
ACDelco: 38174
Dayco: 305335, 89335, 89335FN
Gates: 38174
Goodyear: 49262
Mercedes Benz: 112 200 03 70, 112 200 09 70, 112 300 03 70
Re: Pulley Saver Kit
Iam doing a 185 and have used the bolt head and nut with success, the belt on my 185 IS NOT TOO TIGHT. Between the s/c and alternator I can push down the belt 1 or more inches with a finger with moderate pressure, (deflect the belt). Woody
Too tight kills accessories and their shaft bearings............
Too tight kills accessories and their shaft bearings............
Re: Pulley Saver Kit
Originally Posted by 32krazy!
i tried to cross reference the m/b parts numbers and it comes back fitting a 320 and a sl55. these are 2 different tensioners. autozone doesnt list any of these parts. were did you see the 122$ part?
Re: Pulley Saver Kit
Originally Posted by 70GT6
Strange - I have it. - did you click the link? and still nothing?
went to the website part different part number for the slk32 tensioner. foto shows 3 mount holes. # 305354
ha! found the answer. autozone AND advance auto have the pulley tensioner for the slk32 and the slk320 reversed! the tensioners shown have pulleys which are not removable if im seeing the fotos correctly. im looking for the oem replacement and that raises the cost
Last edited by 32krazy!; 08-18-2009 at 06:42 PM.
Re: Pulley Saver Kit
Originally Posted by waldig
Iam doing a 185 and have used the bolt head and nut with success, the belt on my 185 IS NOT TOO TIGHT. Between the s/c and alternator I can push down the belt 1 or more inches with a finger with moderate pressure, (deflect the belt). Woody
Too tight kills accessories and their shaft bearings............
Too tight kills accessories and their shaft bearings............
edit: b/c i'm dumb
Last edited by jturkel; 08-21-2009 at 01:11 PM.
Forum Regular
Join Date: Apr 2008
Location: St. Louis, MO
Age: 42
Posts: 888
Likes: 0
Received 0 Likes
on
0 Posts
Join Date: Jun 2007
Location: Minnesota
Age: 55
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
