Supercooler / heat exchanger
Re: Supercooler / heat exchanger
Originally Posted by 240M3SRT
Im sure im missing something super obvious but why cant you simply wire the fan to power and ground with a switch in between
Re: Supercooler / heat exchanger
Looks to me like you could just snag the Run Start fused power on the 18 gauge pink/red wire, run it through a switch and splice it into the again fused 18 gauge Red/Blue pump wire. The fan I'm not sure, but the "radiator fan control module" looks nothing more like a duel power relay to me. Question is is the Grey "radiator fan control" wire a ground input or power input (considering it's 20 gauge I'll guess ground). If it's ground then just tap it to a switch then to a ground. if it's power just tap it to a switch to your fused pink/red run start wire of earlier, or possibly T it in with your output to the pump. All should be able to be done with just maybe 2 feet of 18 gauge wire at the pulse modual & powertrain control module.
Re: Supercooler / heat exchanger
Originally Posted by tom2112
Call me crazy, but I bet you could even hook it up to a temp sensor so that the fan and the pump automatically shut off after the coolant reached a certain low temp.
They make sensors like that. We used one on our 9 second neon to turn on and off the trans cooler fan based on trans temp.
Re: Supercooler / heat exchanger
Originally Posted by j-fire
i also heard about deleting the air pump. how does that work with an everyday driver? probably throw cel codes?
Re: Supercooler / heat exchanger
Originally Posted by waldig
- OkDamblame it who is breaking into my computer. I have been running a stage 1 fan control and also have a pump control for all of last season.
Fan and pump control are under development. It works but I gotta get it to be easier to implement & install. THe fan controller is an electronic module and will not tolerate jumpers or gizmos to bypass it.
That is going to take some time as I really want to paint the hood before my Batteries arrive in two weeks, Iam told. That is for weight control in the front end, so I can corner better but this is getting ahead of the cart with the horse...
Woody
Sorry for dragging up an older thread, but was the fan and pump control completed and made available? Thanx
Thread
Thread Starter
Forum
Replies
Last Post
xfireohio
Cars For Sale - Archive
10
07-20-2020 12:03 AM
atdavis2
Cars For Sale - Archive
0
09-21-2015 01:25 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)