Aluminum Intake Manifolds for srt6
Re: Aluminum Intake Manifolds for srt6
Originally Posted by Eleventeen
Is there still time to get in on the first run at the introductory price? If not, when and how much will the second run be? Thanks!
here is a picture before cleanup and coating with where we will put the supercharged emblems (for those that want them)
Forum Regular
Join Date: Oct 2007
Location: Maryland
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
Re: Aluminum Intake Manifolds for srt6
These mani's are awesome! If I could only give one suggestion, put the bung in the drivers side mani, as this would be the closest route to the pillar where gauges will be mounted( I had to cut and splice my wiring to make it stretch that far ). Otherwise after driving a while with them I feel I have more power now, I think the four runs I had last Sunday wasn't enough time for the computer to fully adjust. This thing is flying now!!!! I'm real excited to go back out with these and the colder weather, lookout record book!
Re: Aluminum Intake Manifolds for srt6
Originally Posted by MD SRT6
These mani's are awesome! If I could only give one suggestion, put the bung in the drivers side mani, as this would be the closest route to the pillar where gauges will be mounted( I had to cut and splice my wiring to make it stretch that far ). Otherwise after driving a while with them I feel I have more power now, I think the four runs I had last Sunday wasn't enough time for the computer to fully adjust. This thing is flying now!!!! I'm real excited to go back out with these and the colder weather, lookout record book!
again its just as easy to be on the drivers side if anyone would prefer it
Forum Regular
Join Date: Oct 2007
Location: Maryland
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
Re: Aluminum Intake Manifolds for srt6
I'm going to the track Sunday with the engine set up for these mani's, all motor spark plug gap, all motor 100 octane tune from Inmotion, so we will know exactly what they gain. My best run on motor prior to mani's was 11.95, with mani's at the MIR challenge 11.92 ( My spark plugs were set up for nitrous, which means .030 gap ) So Sunday is supposed to be 65 degrees and we can see just what the gain is. I will report back soon.
Re: Aluminum Intake Manifolds for srt6
Originally Posted by tom2112
Just checking, but did I miss a post where it said the mani's were done and we should send in the rest of the cash?
Forum Regular
Join Date: Oct 2007
Location: Maryland
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
Re: Aluminum Intake Manifolds for srt6
Just got back from Capitol Raceway,made four all motor runs,here is the best time slip and previous info. These are the results, judge for yourself!
Best time without mani's- 11.95 @ 113.09 90 degrees
First time out with mani's 11.92 @ 115.82 86 degrees
Today @ capitol Raceway 11.84 @ 117.51 78 degrees
Next Month when temps are in the 50's = gonna be priceless
Time slip
R/t .710
60' 1.715
330 4.971
1/8 7.643
1/8mph 92.13
1000' 9.93
1/4 11.86
1/4 mph 117.51
Best time without mani's- 11.95 @ 113.09 90 degrees
First time out with mani's 11.92 @ 115.82 86 degrees
Today @ capitol Raceway 11.84 @ 117.51 78 degrees
Next Month when temps are in the 50's = gonna be priceless
Time slip
R/t .710
60' 1.715
330 4.971
1/8 7.643
1/8mph 92.13
1000' 9.93
1/4 11.86
1/4 mph 117.51
Re: Aluminum Intake Manifolds for srt6
Originally Posted by MD SRT6
Just got back from Capitol Raceway,made four all motor runs,here is the best time slip and previous info. These are the results, judge for yourself!
Best time without mani's- 11.95 @ 113.09 90 degrees
First time out with mani's 11.92 @ 115.82 86 degrees
Today @ capitol Raceway 11.84 @ 117.51 78 degrees
Next Month when temps are in the 50's = gonna be priceless
Time slip
R/t .710
60' 1.715
330 4.971
1/8 7.643
1/8mph 92.13
1000' 9.93
1/4 11.86
1/4 mph 117.51
Best time without mani's- 11.95 @ 113.09 90 degrees
First time out with mani's 11.92 @ 115.82 86 degrees
Today @ capitol Raceway 11.84 @ 117.51 78 degrees
Next Month when temps are in the 50's = gonna be priceless
Time slip
R/t .710
60' 1.715
330 4.971
1/8 7.643
1/8mph 92.13
1000' 9.93
1/4 11.86
1/4 mph 117.51
Forum Regular
Join Date: Oct 2007
Location: Maryland
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
Roadster Rules
Join Date: Jun 2007
Location: Minnesota
Age: 55
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
Re: Aluminum Intake Manifolds for srt6
Originally Posted by MD SRT6
Just got back from Capitol Raceway,made four all motor runs,here is the best time slip and previous info. These are the results, judge for yourself!
Best time without mani's- 11.95 @ 113.09 90 degrees
First time out with mani's 11.92 @ 115.82 86 degrees
Today @ capitol Raceway 11.84 @ 117.51 78 degrees
Next Month when temps are in the 50's = gonna be priceless
Time slip
R/t .710
60' 1.715
330 4.971
1/8 7.643
1/8mph 92.13
1000' 9.93
1/4 11.86
1/4 mph 117.51
Best time without mani's- 11.95 @ 113.09 90 degrees
First time out with mani's 11.92 @ 115.82 86 degrees
Today @ capitol Raceway 11.84 @ 117.51 78 degrees
Next Month when temps are in the 50's = gonna be priceless
Time slip
R/t .710
60' 1.715
330 4.971
1/8 7.643
1/8mph 92.13
1000' 9.93
1/4 11.86
1/4 mph 117.51
Re: Aluminum Intake Manifolds for srt6
ok, just got back the new y pipe tinted to match the cai silver, the same color we are getting most of the manifolds tinted, here is a color comparisson, its not perfect but very close between the teflon and powdercoat used on our CAI's. the first wave of manifolds are now at the front of the line there and im hoping to get them out friday assuming we get them back early enough in the day. we cancelled our trip to vegas today/tomorrow for the SEMA show in order to make as much progress as possible on these for you guys.