The new SRT6 engine badges are in, Confirm you still want them.
Senior Member
Joined: Jul 2007
Posts: 7,951
Likes: 9
From: Dallas, the Republic of Texas
Re: The new SRT6 engine badges are in, Confirm you still want them.
I got mine installed. It looks great and very professional. I opted not to cut the cover off that goes over the supercharger. I'm affraid I won't be able to get a straight & smooth cut. So, the badge will only be seen by a few people when the entire cover is pulled off. :-(
Thread Starter
|
Senior Member
Joined: May 2006
Posts: 3,028
Likes: 3
From: Folsom, CA
Re: The new SRT6 engine badges are in, Confirm you still want them.
Originally Posted by InfernoRedXfire
I got mine installed. It looks great and very professional. I opted not to cut the cover off that goes over the supercharger. I'm affraid I won't be able to get a straight & smooth cut. So, the badge will only be seen by a few people when the entire cover is pulled off. :-(
Thread Starter
|
Senior Member
Joined: May 2006
Posts: 3,028
Likes: 3
From: Folsom, CA
Re: The new SRT6 engine badges are in, Confirm you still want them.
Silverfox your Fender Badges, Engine Plate and Dash Plaque are on their way.
JMLasker your Engine Plate is on the way.
Leap your Fender Badge is on the way.
SRT6cross your Fender Badges and Engine Plate are on the way.
Ringmaster your Fender Badges are on the way.
Thanks all. You should be getting them in 3 to 5 business days.
JMLasker your Engine Plate is on the way.
Leap your Fender Badge is on the way.
SRT6cross your Fender Badges and Engine Plate are on the way.
Ringmaster your Fender Badges are on the way.
Thanks all. You should be getting them in 3 to 5 business days.
Senior Member
Joined: Apr 2005
Posts: 3,818
Likes: 1
From: Near the Dragon's Den
Re: The new SRT6 engine badges are in, Confirm you still want them.
Originally Posted by SRT SIX
Silverfox your Fender Badges, Engine Plate and Dash Plaque are on their way.
JMLasker your Engine Plate is on the way.
Leap your Fender Badge is on the way.
SRT6cross your Fender Badges and Engine Plate are on the way.
Ringmaster your Fender Badges are on the way.
Thanks all. You should be getting them in 3 to 5 business days.
JMLasker your Engine Plate is on the way.
Leap your Fender Badge is on the way.
SRT6cross your Fender Badges and Engine Plate are on the way.
Ringmaster your Fender Badges are on the way.
Thanks all. You should be getting them in 3 to 5 business days.
Thank you!
Bill (SF)
Thread Starter
|
Senior Member
Joined: May 2006
Posts: 3,028
Likes: 3
From: Folsom, CA
Joined: Nov 2007
Posts: 3
Likes: 0
Re: The new SRT6 engine badges are in, Confirm you still want them.
Thread Starter
|
Senior Member
Joined: May 2006
Posts: 3,028
Likes: 3
From: Folsom, CA
Re: The new SRT6 engine badges are in, Confirm you still want them.
Originally Posted by ChadAEnglish
Look for a PayPal invoice.
Karl
Thread Starter
|
Senior Member
Joined: May 2006
Posts: 3,028
Likes: 3
From: Folsom, CA
Joined: Sep 2007
Posts: 17
Likes: 0
Re: The new SRT6 engine badges are in, Confirm you still want them.
Karl:
I received the SRT-6 engine badge, and put it into its rightful place on the supercharger. Used the J-B Weld as instructed, and everything went well.
One question - how did you cut the engine cover to show off more of the supercharger and engine badge. It doesn’t look that easy to get a precise cut.
Jerry Lasker
I received the SRT-6 engine badge, and put it into its rightful place on the supercharger. Used the J-B Weld as instructed, and everything went well.
One question - how did you cut the engine cover to show off more of the supercharger and engine badge. It doesn’t look that easy to get a precise cut.
Jerry Lasker
Thread Starter
|
Senior Member
Joined: May 2006
Posts: 3,028
Likes: 3
From: Folsom, CA
Re: The new SRT6 engine badges are in, Confirm you still want them.
Originally Posted by jmlasker
Karl:
I received the SRT-6 engine badge, and put it into its rightful place on the supercharger. Used the J-B Weld as instructed, and everything went well. One question - how did you cut the engine cover to show off more of the supercharger and engine badge. It doesn’t look that easy to get a precise cut.
Jerry Lasker
I received the SRT-6 engine badge, and put it into its rightful place on the supercharger. Used the J-B Weld as instructed, and everything went well. One question - how did you cut the engine cover to show off more of the supercharger and engine badge. It doesn’t look that easy to get a precise cut.
Jerry Lasker
I trimmed the complete edge with the cross hatch. That is the cleanest way. I tried trimming it and reattaching the back but there is a taper to the cover and it would not line up. If you look at my engine pic it shows where I trimmed it. The only downside is the exposed bolt holes (I think they are to attach a plate to be able to lift the engine). I am going to find a couple bolts that will fit.
Simon has a post about installing the new 55 Y pipe and shows he trimmed part of the crosshatch cover to allow the plate to be seen.
Karl
Senior Member
Joined: Jul 2003
Posts: 973
Likes: 0
From: NorthEast
Senior Member
Joined: May 2004
Posts: 4,094
Likes: 7
From: Charleston, SC
Re: The new SRT6 engine badges are in, Confirm you still want them.
Originally Posted by Punkin
For those of you who don't have but are thinking of getting the emblems, these are really well produced and look great. You will not be disappointed.
Senior Member
Joined: Jul 2003
Posts: 973
Likes: 0
From: NorthEast
Re: The new SRT6 engine badges are in, Confirm you still want them.
Originally Posted by HDDP
How long did it take for you to recieve them ? Because I paid for mine about a month ago and have not gotten them !!!
