Rear Fascia Panels (Rear Diffusers) - Before & After
Rear Fascia Panels (Rear Diffusers) - Before & After
Here they are - not much to it! Just a pair of molded plastic pieces.
To install, you hold the panels in place and mark the center of the 6 holes on the panels to drill. Once your centers are marked, you drill 6 1/8" holes, and then go through the same holes with the 5/16" bit. The holes go into the bottom of the rear bumper cover which is easy because it is urethane. Then wipe down the contact area with the alcohol swab provided in the kit, remove the backing from the two-sided tape, place the panels in place while making sure they are lined up. After the tape is applied the panels should stay in place. Finish it up by installing the fasteners. Takes 10-15 mins tops.
If you decide to remove them later, the holes you drill will be out of sight.
Chrysler Part # - 82209208
List Price $210 / Cost $178 (with CTC 15% discount - makes them the same price as most online parts stores, but no shipping).
Got them next day from my local dealer (Mission Chrysler in San Antonio).
Tools required -
Drill
1/8" Drill Bit
5/16" Drill Bit
Phillips Screwdriver
Marker/Pen/Pencil to mark the centers of the holes
Parts:
Before:
After:
They should've been included stock on these cars, especially the SRT.
SQ
To install, you hold the panels in place and mark the center of the 6 holes on the panels to drill. Once your centers are marked, you drill 6 1/8" holes, and then go through the same holes with the 5/16" bit. The holes go into the bottom of the rear bumper cover which is easy because it is urethane. Then wipe down the contact area with the alcohol swab provided in the kit, remove the backing from the two-sided tape, place the panels in place while making sure they are lined up. After the tape is applied the panels should stay in place. Finish it up by installing the fasteners. Takes 10-15 mins tops.
If you decide to remove them later, the holes you drill will be out of sight.
Chrysler Part # - 82209208
List Price $210 / Cost $178 (with CTC 15% discount - makes them the same price as most online parts stores, but no shipping).
Got them next day from my local dealer (Mission Chrysler in San Antonio).
Tools required -
Drill
1/8" Drill Bit
5/16" Drill Bit
Phillips Screwdriver
Marker/Pen/Pencil to mark the centers of the holes
Parts:
Before:
After:
They should've been included stock on these cars, especially the SRT.
SQ
Last edited by ShawnQ; 10-12-2007 at 01:11 PM.
Re: Rear Fascia Panels (Rear Diffusers) - Before & After
Originally Posted by The Toy
Looks nice! Almost makes you want to take a grinder and remove that tow hook.
Mike, it's a good mod and easy to do. I wish they weren't quite as pricey, but the wife liked and wanted them...and I liked 'em too. I figured I'd get a set before they were no longer available.
SQ
Join Date: Jun 2007
Location: South Coast of England
Posts: 1,670
Likes: 0
Received 1 Like
on
1 Post
Re: Rear Fascia Panels (Rear Diffusers) - Before & After
Hi Any thoughts on the purchase and the cost to ship to the UK. The Chrysler diffusers here are £306.00 from main dealer and if fitted £441.00. I'm unable to locate them elsewhere. in the UK...unless any UK members know different?
Black Crossfire Coupe
2006 Reg V6 A XF
Black Crossfire Coupe
2006 Reg V6 A XF
Re: Rear Fascia Panels (Rear Diffusers) - Before & After
Originally Posted by UK ken
Hi Any thoughts on the purchase and the cost to ship to the UK. The Chrysler diffusers here are £306.00 from main dealer and if fitted £441.00. I'm unable to locate them elsewhere. in the UK...unless any UK members know different?
Black Crossfire Coupe
2006 Reg V6 A XF
Black Crossfire Coupe
2006 Reg V6 A XF
http://www.wyckoffchryslerparts.com
Rear Diffusers $177 (£88.50)
Cargo roller cover $233 (£116.50)
The cheapest I could find anywhere and absolutely fantastic build quality. Easy to fit too, even the Cargo cover only took less than 1 hr.
Cheers,
Si
Join Date: Sep 2007
Location: MOFN, AL, 70 miles from George
Age: 66
Posts: 8,015
Likes: 0
Received 10 Likes
on
10 Posts
Re: Rear Fascia Panels (Rear Diffusers) - Before & After
These are on my short list. I thought perhaps chrome to match the exhaust tips, then more of a silver grey to match the window surround and naturally color matched as well. Not to mention flat black. I may paint a bunch of cardboard different colors to get a better idea of how each would look. And if you paint them Aero Blue be sure to post a picture for us color blind owners.
Join Date: Sep 2007
Location: MOFN, AL, 70 miles from George
Age: 66
Posts: 8,015
Likes: 0
Received 10 Likes
on
10 Posts
Re: Rear Fascia Panels (Rear Diffusers) - Before & After
Originally Posted by MikeR
Max, paint them Aero Blue and send them to me!!!
MikeR
MikeR
UPS would cost $1200!
https://www.crossfireforum.org/forum...ad.php?t=26840