I am interested in the SRT plaque. I have a 2005 SRT coupe. Do you have any left?

 

I have one with holes and several without. (look at pics in this thread).

I am offering a special price on the one with holes if ordered with a dash plaque at the same time. Both for $32 including S&H. (only one left).

The others are $20.50 including S&H.

Let me know which you want and your email address.

Thanks,

Karl

 

Mpates,

Your plaques went out today. Expect them in 3-5 business days.

Thanks,

Karl

 

Woodlands2,

Thanks for the order both the SRT6 engine plaque and the Crossfire dash plaque shipped today. Look for them in 3 - 5 business days.

Enjoy,

Karl

 

Have to say that I am very impressed with the engine plaque, It looks like it should of been made that way in the first place.

Took a week to receive and only a couple minutes to mount with the help of JB Weld.

Thanks again for the good product SRT.

O yea... and a free bump.

 

Glad you like it...thanks for the bump.

 

Received your plaque SRT Six, thanks!

Very very nice, so now I'm the only European with your plaque. :-)

grtz

 

Do you still have these...how do I order.

Thanks.

 

Glad you like it...take a picture when you install it...

 

You have a PM.

 

I got a chance to ask Mark Ramsey, AMG Product Management, MBUSA, if the SRT6 engine was assembled and tested at AMG, Affalterbach, Germany. He wasn't 100% sure, but indicated that it was.

Here's some photos of the AMG nameplate. AMG engine, and SRT6 engine for comparison.

 

Plaque's look great.

 

-32-

Chrysler states on their website that the engine is "handbuilt". AMG is stamped all over the components. In your pictures you show both engines with their respective covers. If you take them off (or modify the SRT6 cover) they are identical except for the fact that the AMG plate is installed on the MB SLK AMG and it is just a blank area on the SRT6. That is why I created the SRT6 plaque. Most that have installed one think it should have come like that from the factory.

 

SRT SIX, I think you mis-understand.

My SRT6 (car) was assembled and tested at Wilhelm Karmann BmbH Osnabruck.

My SLK32 (car) was assembled and tested at DaimlerCrysler AG Stuttgart.

Both the SRT6 and SLK32 engines were assembled and tested at AMG, Affalterbach, Germany.

All I'm suggesting is you change the placard to read: Mercedes AMG, Affalterbach, Germany.

 

I got ya...

I did the Karmann designation for the vehicle...It will be another setup charge to change now.

If any other SRT6 owners would prefer the change, let me know.

Also I was thinking of another badge similar to the one on the back that would have the SRT6 designation with the word SUPERCHARGED either over or under it. Of course it would not be as thick as that on the back. They would rectangular and be sold in pairs. They could be mounted on the side above the strakes behind the front wheel. Similar to published pictures of the way they were going to make the 2006 version.

Let me know if you are interested. A rough estimate would be $30 a set.

 

Your check has cleared Paypal and they are on their way. Allow 3-5 working days...Enjoy and thanks!

 

SRT SIX I would buy a plaque that read Mercedes AMG - Affaletebach even though I have the regular one it is just would it not be a pain in the *** to remove the jb weld that holds the old plaque? Or is there some kind of easy method? And for the emblem you are talking about for the side strakes I would have to see a conceptual image at least to be able to tell you if I would purchase it or not... sorry. = (

 

Sidez,

The MB part of DCX is quite "fussy" about people using their name. I would have no problem with switching the name of the city, but would most likely keep the Daimler Chrysler reference. The supercharger has AMG all over it, so that is not a problem. If a new plate comes out, you could affix it over the old one with the JB Weld, it will hold just fine. Also if this happens, I will offer an additional discount to those who purchased the original design...right now this part is a big "if".

As far as the other emblems, right now I am looking at interest. The design and setup costs are something that I have to pay up front. As you are aware the current plaques are very professional and I would not accept anything less from the side markers.

If interest is there I will invest the time and money, then present it to the forum members. BTW if there is anything along these lines that Limited or Base model Crossfire owners would like, shoot the ideas my way and I will see what we can come up with.

Thanks for the support,

Karl

 

Karl,

I might be interested in the SRT6 Supercharged plaques once I've seen the design. Thanks for your efforts.

 

Here is a sample of the proposed fender badge. Dimensions would be 3" x .75" (the one on the back is 2" x .5")

The badge would be silver with black engraved SRT. The 6 area would be reversed red with a silver raised 6. Across the bottom would be a black recessed area with raised silver letters.

The image shown is rough and the letters would be smoothed out. Just looking for feedback at this point and whether you would be interested in getting them.