Crossfire Coupe A place to discuss Coupe specific topics.
Sponsored by:
Sponsored by: CARiD

Popped into work to carry out a few little jobs

Thread Tools
 
  #1 (permalink)  
Old 12-02-2015 | 06:01 PM
dpbayly's Avatar
Thread Starter
Joined: Mar 2014
Posts: 82
Likes: 1
From: UK, Royston, Herts
Default Popped into work to carry out a few little jobs

I was at home and a little board so decided to pop into work and get it up on the ramp and carry out a couple jobs first being fitting the a pair of new front tyres and as always I went with Continental Sport Contact 5P's awesome tyres and I'd always recommend them for anyone looking for a great tyre they don't last well but IMO you wont find a better tyre for grip in wet and dry.

DSC_0259_zpsvyomalfn.jpg

Next little job was to add a very light tint film to my fog lights that I run as DRL's with LED's in

Before:

DSC_0270_zps7cjiutsp.jpg

After:

DSC_0271_zps0jdur6ua.jpg

Stood back as a comparison:

DSC_0272_zpsycokv2yo.jpg

With the lights on showing there's no difference in light out put due to it being such a light tint:

DSC_0273_zpsubllnzl0.jpg

Once I had done the DRL's I decided to have ago at my headlights and here's the results

Left one done:

DSC_0275_zps7ppw7txf.jpg

Both done and I'm loving the look, not going to be to everyones taste but I like it.

DSC_0279_zpspaszahcv.jpg

I'll get some pictures in the daylight tomorrow but I can say there was no noticeable difference in light out put on my drive back home especially as I'm running 55w 10K HID's.
 
  #2 (permalink)  
Old 12-03-2015 | 04:12 PM
dpbayly's Avatar
Thread Starter
Joined: Mar 2014
Posts: 82
Likes: 1
From: UK, Royston, Herts
Default Re: Popped into work to carry out a few little jobs

A few pictures in daylight today:

DSC_0284_zpsgazhojvn.jpg

DSC_0285_zpsoszdq9pe.jpg

A few other jobs also done today I first had my paintless dent repair guy over to see to all the little dings:

DSC_0292_zpsqzoffhhv.jpg

I'm now completely ding free.....

The other little job was to fit my new graphic I had ordered a Karmann one in silver made to my measurements:

DSC_0290_zpsjzs9bagl.jpg

Fitted:

DSC_0291_zpslatzldma.jpg
 
  #3 (permalink)  
Old 12-04-2015 | 06:42 AM
ardenian's Avatar
Joined: Apr 2015
Posts: 235
Likes: 10
From: uk
Default Re: Popped into work to carry out a few little jobs

Originally Posted by dpbayly
A few pictures in daylight today:





A few other jobs also done today I first had my paintless dent repair guy over to see to all the little dings:



I'm now completely ding free.....

The other little job was to fit my new graphic I had ordered a Karmann one in silver made to my measurements:



Fitted:

Looking good.
 
  #4 (permalink)  
Old 12-16-2015 | 01:41 PM
ZX2 Nick's Avatar
Joined: Feb 2009
Posts: 274
Likes: 10
From: Clinton, Michigan
Default Re: Popped into work to carry out a few little jobs

Where is this? In Blighty?
 
  #5 (permalink)  
Old 12-16-2015 | 03:05 PM
dpbayly's Avatar
Thread Starter
Joined: Mar 2014
Posts: 82
Likes: 1
From: UK, Royston, Herts
Default Re: Popped into work to carry out a few little jobs

Yep it's in the UK near Cambridge just north of London
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
chturner
Parts/Accessories for sale - Archive
19
10-14-2019 05:42 PM
Mr G
Troubleshooting & Technical Questions & Modifications
28
05-10-2016 07:12 AM
Steve - UK
Wheels, Brakes, Tires and Suspension
7
05-05-2008 05:32 PM
E74778
Crossfire Coupe
2
11-30-2007 11:11 PM
NJspeed69
Troubleshooting & Technical Questions & Modifications
8
02-26-2006 02:27 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 11:57 PM.