Crossfire Coupe A place to discuss Coupe specific topics.
Sponsored by:
Sponsored by: CARiD

Gears!

Thread Tools
 
  #1 (permalink)  
Old 08-26-2004 | 07:44 PM
jas142's Avatar
Thread Starter
Joined: Aug 2004
Posts: 21
Likes: 0
Default Gears!

What the crossfires, especially the autos, REALLY need is some steeper gears. I believe the stocks are 3.07. Somthing around 3.55 or 3.73 would be perfect.. Since They run high 14 second 1/4 miles, and the 215 hp gets it up to over 150 mph... its definately highway geared.

Anyone think rear end gears will become avaliable any time soon? I'm willing to bet they'd take off a good .3 to .4 seconds from the 1/4 mile ET
 
  #2 (permalink)  
Old 08-26-2004 | 08:13 PM
former NXMX5's Avatar
Senior Member
Joined: Aug 2004
Posts: 1,744
Likes: 2
From: Long Island, NY
Default

i doubt it. what gears does the SLK run? any options available for that car? do autos and six speeds have different rear gears?

if you wanted a drag car, you bought the wrong one
 
  #3 (permalink)  
Old 08-27-2004 | 02:45 AM
Mo_Bandy's Avatar
Joined: Jun 2004
Posts: 82
Likes: 0
From: San Bernardino CA
Default

The rear end on the Crossfire auto is a 3.27... I beleive the Stick is also 3.27.

Mo
 
  #4 (permalink)  
Old 08-27-2004 | 11:25 PM
RGT's Avatar
RGT
Joined: Jul 2004
Posts: 80
Likes: 0
From: Michigan USA
Default

I did see a website where some company was offering rear-end swaps for Mercedes.
Of course I can't find it again!!! I thought I had put it in my favorites! Guess not!

Anyway, they didn't have one listed specifically for the SLK320, but they did have a general price range of several thousand dollars!
(Because the gears in MB diffs are hand fitted matched gear sets)

I'll keep looking to see if I can re-find that site...
Matt
 
  #5 (permalink)  
Old 08-28-2004 | 12:47 AM
drunkiq's Avatar
Forum Regular
Joined: Apr 2004
Posts: 491
Likes: 0
From: Austin, Texas
Default

your not going nuts - I saw it to but did not book mark it.


-marc
 
  #6 (permalink)  
Old 08-28-2004 | 03:12 AM
DFWSBR's Avatar
Forum Regular
Joined: Nov 2003
Posts: 674
Likes: 0
From: Dallas, Tx
Default

I was reading spec's on the SRT6, it has a different rear end. Perhaps a simple parts order / swap can take place there. Or you could always find a wrecked SLK32 and pull it from there.
 
  #7 (permalink)  
Old 08-28-2004 | 04:20 AM
David Burns's Avatar
Senior Member
Joined: Mar 2004
Posts: 1,352
Likes: 1
From: Manassas, VA
Default

Crossfire comes with 3.25:1 Axle Ratio, except the SRT-6, which is 3.07:1.
http://www.chrysler.com
"A numerically lower axle ratio results in lower engine rpm and better fuel economy. A numerically higher ratio improves acceleration, climbing grades, carrying loads or pulling a trailer."

2003 SLK320 Roadster (essentially our car) 3.27:1.
2003 SLK32AMG Roadster (essentially SRT-6) 3.07:1.
2005 CLK320 Coupe (same 3.2L engine) comes with 3.27:1.
2005 CLK320 Cabriolet (same 3.2L engine, same "TouchShift" 5 speed auto) comes with 3.45:1 rear.
2005 SLK350 Roadster will supposedly have 3.27:1.
 
  #8 (permalink)  
Old 08-28-2004 | 10:50 AM
Dan Root's Avatar
Banned
Joined: May 2004
Posts: 3,205
Likes: 1
From: port hueneme ca.
Default

Try 18' rear wheels and 225/40/ tires in rear and you could feel the change.M.B. guys use to put high 3s rearends in the 400v-8s and it would feel like a 500v-8 !probably $1500-2k.
 
  #9 (permalink)  
Old 08-28-2004 | 11:56 PM
jas142's Avatar
Thread Starter
Joined: Aug 2004
Posts: 21
Likes: 0
Default

Originally Posted by Dan Root
Try 18' rear wheels and 225/40/ tires in rear and you could feel the change.M.B. guys use to put high 3s rearends in the 400v-8s and it would feel like a 500v-8 !probably $1500-2k.
I was wondering, if I put 18s all around instead of the 18/19 combo, would it affect the speedo reading or anything?
 
  #10 (permalink)  
Old 08-29-2004 | 12:59 AM
Cyril Baldwin's Avatar
Senior Member
Joined: Jan 2004
Posts: 1,658
Likes: 3
From: Texas
Default

Check this site for differential swaps and other performance kits for SLK

http://www.bergwerks.com
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jimf
Troubleshooting & Technical Questions & Modifications
11
10-10-2015 11:22 AM
rfourt
Crossfire SRT6
1
09-25-2015 02:38 PM
Cuda56
Parts/Accessories for sale - Archive
1
08-11-2015 01:11 PM
maxcichon
General
11
07-31-2015 12:34 PM
XFIRED-TX
Crossfire Roadster
4
07-14-2015 11:48 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 06:39 AM.