Hey everyone!

I need some help with the trunk trim. As you can tell the tan trunk panel, lining the hatch door has been removed and so I received one from Ebay. To Those who have replaced the piece before, is there a trick on how to replacing it without breaking the clips? What side do I start slowly installing the panel?? It seems to be held in by clips as well as plastic screws?

Thanks for your help!

Nick

 

I am so sorry for the picks being upside down again. I don't know how to correct that. Valk, if you read this, would you please correct me?? Thanks a bunch!

 

You correct that before you send them, as for the panel, yes there are clips and plastic pins. Go slowly, make sure things line up as you start at the back end and push the panel into place. If the pins don't line up you will crush the pins, I keep a small bag of extra pins around, just in case. It is easier than it looks.

 

Thanks for your tips Jeff. Would you start by lining up and attaching the pins?
If I had to get some replacement pins where do I go? Does Autozone carry those and what am I asking for?

PS The pictures are perfectly fine on my computer but every time I attach them they turn upsdie down on the forum. Not sure if it has to do with my picture format or my Operating system?