When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Installed stoptech stainless brake hoses on all of the wheels , new front rotors & ceramic pads, bled the brakes & clutch , installed caliper covers . Tomorrow I'll bed the brakes and see if all is working properly.
Custom covers - Blue isn't a standard color from MGP. Looks good on the car. I've got yellow ones on my coupe.
I had my SRT6 wheels refinished at a shop in Royal Oak, MI (Wheel Works). Turned out pretty good. I had virtually no curb rash, but the clear coat was flaking and the wheels started oxidizing. The hubs were in decent shape, so I did not do them.
omg she passed inspection and has a new tag !!! whoop whoop was the mass airflow sensor causing a slight irregular idle at stop light and ck engine light . the code i was getting were po 171 and po174 i actually jumped into the air lol tk all of yall for your knowledge and willingness to share it !!dee
I had my SRT6 wheels refinished at a shop in Royal Oak, MI (Wheel Works). Turned out pretty good. I had virtually no curb rash, but the clear coat was flaking and the wheels started oxidizing. The hubs were in decent shape, so I did not do them.
~ Wet sanded after taping off the windshield surround to prep it for painting. I could stand the deteriorated clear coat no more. Too many stories about losing a piece after removing, so I decided to repaint it in place....the black SRT....I'll post pics when I'm done.
After stormy weather yesterday, today's weather was great! Uncovered the coupe so wife & I could take a drive. Needed to clear the mothballs. I just love driving this car! After we got home, did a quick inspection all around & under the hood.
Still waiting for the hydraulic cylinders to come back for the blue roadster and parts that are out for paint so I pulled the interior door panels and replaced the bungee cord on the door pockets. The old ones were so stretched out they hung down to the bottom of the door. Came out great.
Took some time yesterday, after the storm fronts all went by, to treat the leather seats in my coupe. Seats still look great after all these years. Almost "factory fresh".
I installed a 1 inch piece of Black Velcro Sticky Back on the forward edge of my cupholder to prevent it from continually opening up. One piece on the cup holder itself, and the other on the cup holder frame...an idea from my better half. Can't even see it...
Wasn't today but on 5-6-2021 I met with Rob from Neededswings. I got called out of town (work). Met with Rob about some upgrades for my 2005 SRT6 Crossfire and I was not only impressed on his knowledge on the Crossfire but he is truly passionate about his craft. His attention to detail and explaining everything in plain english was refreshing, "Never" got the feeling I was talking to a used car salesman lol.
I will include more details later.
Was a good day for me and the Crossfire
I installed a 1 inch piece of Black Velcro Sticky Back on the forward edge of my cupholder to prevent it from continually opening up. One piece on the cup holder itself, and the other on the cup holder frame...an idea from my better half. Can't even see it...
Looks great!! My congrats to your better half for the idea & to you for executing it!! Simple & effective!!
Went to Frankenmuth Michigan today with the wife & Crossfire, had a great day, Chicken dinner and shopping at Birch Run. On the way home got hit on the left rear quarter on I-75 South coming home. My little Crossfire was hit by a brand new Ram 4 door pick up truck and she held her own with both vehicles getting scrapped about the same. (I got lucky) could have been worse.
Ill get her fixed up asap and will post the repair.
Hope you all have a better night than we did but we are glad our little Crossfire kept us safe and unharmed
J&K SRT6 5/15/2021 South I-75 Incident 5/15/2021 South I-75 Incident
Re: What did you do to your Crossfire today?
