What did you do to your Crossfire today?
Re: What did you do to your Crossfire today?
I saw one r/h $27.50 on car-part.com at American Auto & Truck Salvage, Inc. USA-FL(Fruitland-Park) Request_Quote 1-800-329-8284
Last edited by dcskmail; 07-13-2020 at 09:13 AM.
Re: What did you do to your Crossfire today?
The fix is here on the forum.
Re: What did you do to your Crossfire today?
Mine's not broken per se, but the silver coating is beginning to peel-off and has the potential to cut you. The problem is only on the left-driver's side and on the back-side of the handle where your fingers always grasp it to pull the door closed.
Re: What did you do to your Crossfire today?
~ Changed out a broken driver side motor mount on the Aero-Blu Roadster...before it started raining. No vibration now. It's almost ready for sale. I don't need 4 of these cars. Last thing to fix is the six inch seam separation on the soft top. It will still need a fresh steering stabilizer, fresh tie rod assembly, fresh brakes, fresh hood support and floor mats. The next owner can do all of that.
Re: What did you do to your Crossfire today?
Installed double ground cables today, other than that I changed the fuel filter, the antifreeze, the spark plugs, all valve covers sealing, the serpentine belt, installed the bigger TB and the sensor housing, the new TB seal, the original Mercedes engine black cover, cam and crank sensors, rollover protection bars, the diffusers and a new cup holder from Audi TT.
Last edited by monaderio; 07-18-2020 at 08:02 PM.
Re: What did you do to your Crossfire today?
Installed double ground cables today, other than that I changed the fuel filter, the antifreeze, the spark plugs, all valve covers sealing, the serpentine belt, installed the bigger TB and the sensor housing, the new TB seal, the original Mercedes engine black cover, cam and crank sensors, rollover protection bars, the diffusers and a new cup holder from Audi.
The following users liked this post:
CROSSFIRERUSH (07-18-2020)
Re: What did you do to your Crossfire today?
There is a thread about that mod with all the part numbers. If I'll find it and I'll let you know.
I bought TB and a bigger housing on eBay.
Here are the part numbers,
1130940048 Air Flow Meter 164 Type
A1131410125 TB
And you have to put Xfire original MAF sensor.
I bought TB and a bigger housing on eBay.
Here are the part numbers,
1130940048 Air Flow Meter 164 Type
A1131410125 TB
And you have to put Xfire original MAF sensor.
Last edited by monaderio; 07-18-2020 at 04:55 PM.
The following users liked this post:
CROSSFIRERUSH (07-18-2020)
Re: What did you do to your Crossfire today?
Installed double ground cables today, other than that I changed the fuel filter, the antifreeze, the spark plugs, all valve covers sealing, the serpentine belt, installed the bigger TB and the sensor housing, the new TB seal, the original Mercedes engine black cover, cam and crank sensors, rollover protection bars, the diffusers and a new cup holder from Audi.
Re: What did you do to your Crossfire today?
You got it https://www.ebay.com/sch/i.html?_fro...dition=4&rt=nc
but I made some mods to fit it right.
Last edited by monaderio; 07-18-2020 at 07:37 PM.
Re: What did you do to your Crossfire today?
I'm checking eBay now. I'll be back in a few minutes
You got it https://www.ebay.com/sch/i.html?_fro...dition=4&rt=nc
but I made some mods to fit it right.
You got it https://www.ebay.com/sch/i.html?_fro...dition=4&rt=nc
but I made some mods to fit it right.
Dent-puller-man is making a career thanks to this Crossfire!
The following 2 users liked this post by WD40:
smfrycruzr (07-19-2020),
Sussudio (07-24-2020)
Re: What did you do to your Crossfire today?
Re: What did you do to your Crossfire today?
Finally installed the LM21 Paddle shifters and repainted the console pieces
reworked the double din. Corrected a few hairline cracks with carbon fibre on the seams.
I’ve included an image of the paint I used for the parts from PPG
I still have to install the bezel around the head unit. Will wait a few days to ensure all connections are solid before I seal it all up.
Replaced the cup holder with the storage bin.
reworked the double din. Corrected a few hairline cracks with carbon fibre on the seams.
I’ve included an image of the paint I used for the parts from PPG
I still have to install the bezel around the head unit. Will wait a few days to ensure all connections are solid before I seal it all up.
Replaced the cup holder with the storage bin.
The following users liked this post:
Sussudio (07-24-2020)