What did you do to your Crossfire today?
Join Date: Mar 2011
Location: Lake Jackson, TX
Age: 34
Posts: 548
Likes: 0
Received 1 Like
on
1 Post
Re: What did you do to your Crossfire today?
I took my entire custom intake piping out and put on 4 coats of the plasti-dip that people are raving about. I figured that some people are using this stuff on their wheels and other parts, so I'll see how well it works on my intake. Letting it adhere over night and will put it on in the am.
Re: What did you do to your Crossfire today?
I decided that today was the day to re solder the RCM, I had previously done my old NA and my spare, but I had never got around to do the 6.
True to form, two of the three connections were obviously weak and required to be fixed. I de soldered the three and then re soldered them.
Now back to the brake job.
True to form, two of the three connections were obviously weak and required to be fixed. I de soldered the three and then re soldered them.
Now back to the brake job.
Re: What did you do to your Crossfire today?
Originally Posted by amx1397
went out for a little ride,,,ok a fast ride.Yep just decided to take the car out. give it a little gas and see what it'll do in less than a half-mile.
Last edited by grip grip; 04-09-2012 at 03:19 PM.
Re: What did you do to your Crossfire today?
Originally Posted by Mimi05SRT6
I took my entire custom intake piping out and put on 4 coats of the plasti-dip that people are raving about. I figured that some people are using this stuff on their wheels and other parts, so I'll see how well it works on my intake. Letting it adhere over night and will put it on in the am.
Re: What did you do to your Crossfire today?
Originally Posted by grip grip
I tried that and it melted. Good luck.
Last edited by Mimi05SRT6; 04-10-2012 at 01:06 PM.
Join Date: Apr 2009
Location: Kingsport Tn.
Age: 72
Posts: 2,358
Likes: 0
Received 5 Likes
on
5 Posts
Re: What did you do to your Crossfire today?
Ordered MikeR's Camber arm. , put my 6 up on Jack stands so I can pull the wheels and take the rear end down to replace the arms and send the wheels back to the Powder coater's for a re-do , and the beat goes on,,,,,,, John if you wouldn't treat that car so rough it wouldn't run rough... J/K GLAD u got home safe...
Re: What did you do to your Crossfire today?
Originally Posted by hcarter
Ordered MikeR's Camber arm. , put my 6 up on Jack stands so I can pull the wheels and take the rear end down to replace the arms and send the wheels back to the Powder coater's for a re-do , and the beat goes on,,,,,,, John if you wouldn't treat that car so rough it wouldn't run rough... J/K GLAD u got home safe...
Re: What did you do to your Crossfire today?
Originally Posted by Mimi05SRT6
I spent the day removing the plasti-dip, which wasn't so bad being that it is like a rubberized coating, and repainted it with high temp black paint. I didn't want to take a chance of any of that stuff melting onto the engine. Lookin' good now!
Post #274 https://www.crossfireforum.org/forum...e-today-7.html
Last edited by grip grip; 04-10-2012 at 07:24 PM.
Re: What did you do to your Crossfire today?
Detailed yesterday,
Tried to smooth/sand the seam in the door pulls...they have cut me twice.
It almost made it sharper.
I installed the fuzzy half of Velcro behind the pulls..no worries now.
Also put a piece of it under the hatch stops...to stop the rattles and to cover paint wear.
And...put a small square of it under the hood bump/stop on the frame where paint is missing....it bugs me. Every engine bay pic seen here has that spot worn/missing paint.
Drove it around looking for car gtg's...need warmer weather for most I guess.
Tried to smooth/sand the seam in the door pulls...they have cut me twice.
It almost made it sharper.
I installed the fuzzy half of Velcro behind the pulls..no worries now.
Also put a piece of it under the hatch stops...to stop the rattles and to cover paint wear.
And...put a small square of it under the hood bump/stop on the frame where paint is missing....it bugs me. Every engine bay pic seen here has that spot worn/missing paint.
Drove it around looking for car gtg's...need warmer weather for most I guess.